Kiryat Ono, Tel Aviv
Jun 26, 2017
“GoldDrive” is an infinite variable, bi-directional drive consisting of hydraulic fixed displacement pumps and motors. As a matter of fact “GoldDrive” is the hydraulic equivalent of the mechanical differential. The idea behind the development of “GoldDrive” is to overcome the limitation of starting torque. According to the traditional equation, torque is equal to power over speed and as a result, we need an infinite amount of torque to start a load at zero output speed. The solution is Slippage, slippage of electrical, mechanical, hydraulic and pneumatic transmissions. “GoldDrive” enables us to achieve full torque at zero output speed.
Jun 25, 2017
The attached figures are of the proof-of-concept prototype Fijalkowski engine, without crankshaft and connecting rod (conrod) mechanisms (C2M), The base internal combustion engine (ICE) concept is that of a common-axis, two-cylinder module incorporating the cylinders, cylinder heads and pistons of the ICE. By using a number of commercially available nano-magneto-rheokogical fluid (NMRF) rotary clutches, acting as NMRF rotary ratchets of an NMRF linear motion-rotary motion/rotary motion-linear motion (LM-RM/RM-LM) and/or rotary motion-rotary motion (RM-RM) mechatronic-commutator with a 2.0-in. stroke was designed to operate with the 2.36-in. bore of the ICE. This NMRF LM-RM/RM-LM and/or RM-RM mechatronic-commutator allows the purely LM ...
Jun 25, 2017
UniQuad - Hydrogen Electric Agricultural Utility Vehicle.
Design of a safer, renewable energy utility vehicle for the rural sector.
What problem does your design idea solve?
Agriculture is second only to forestry in the number of workplace fatalities each year, with farm vehicles in general and Quad Bikes in particular proving problematic. Four-wheeled motorbikes, commonly known as Quad Bikes or All-Terrain Vehicles (ATV’s) have a long history of use in the New Zealand agriculture sector. Currently there are approximately 100,000 Quad Bikes in use. Researchers estimate that 35 farmers come off their Quad Bikes every day; nine of them ...
Orange Park, Florida
Jun 24, 2017
Transportation refrigeration units (TRU) are utilized in the transport of perishable goods. The temperature and environmental controls are critical to the arrival of the perishable goods without damage or spoilage. Typical TRUs have sensors to provide data back to a central processing location such as temperature, humidity, and the operating conditions of the TRUs during transportation.
Each TRU has multiple sensors that can be activated to detect various conditions. Moreover, with fluctuating load requirements come contrasting requirements for the TRU’s electrical generator (GENSET) and environmental control unit (ECU).
The TRU sensors use an RS-232 interface today. It has limitations ...
Bijnor, Uttar Pradesh
Jun 24, 2017
As the population is increasing, the buildings are getting taller and taller. Elevators have become an essential part of modern buildings/towers. But unfortunately every one of us has to face the problem of unnecessarily stoppage of elevators every day and it wastes our precious time. Common reasons behind this problem are-
1. In multi-shaft elevators people generally call all the nearby elevator cabin/cars and enter into the first one available. So later the other cars will stop there unnecessarily.
2. Some naughty kids call the car and run away.
3. Sometimes you call a car and when it ...
Vero Beach, Florida
HOW ECW WORKS:
ECW functions like an elephant trunk, but, instead of a nostril, a cows tongue type device, or, mini car wash.
ECW, arm movement, functions via well know technology, such as 3D printing and robotics, guided by color and by auto exterior CAD details ~
ECW, mini car wash, functions, via a SCRUBBER, 1” wide at this time, which, is held to the auto surface via common magnets and vacuum, trimmed by wheels.
SCRUBBER, removes surface particles without scratching, and, is looped continually, to a particle remover, a wringer, a water applicator, and, back to ...
We all know that the pollution rate is increasing day by day. Every day a vehicle with much reduced pollution rate is released but still the rate of pollution is still the same. That is because of the increased traffic and the vehicle smoke. Automobile engineers have an aim; make vehicles but make no harm. Since i am an automobile engineer who follows the same motto I started thinking about how pollution can be controlled. So from my survey it was found that two wheelers are the main source of pollution especially when they are at low gears. The fundamental ...
Tiruchirappalli, Tamil Nadu
TITLE: Linear Motion Wiper System for Buses
Windshield wipers play a key role in assuring the driver's safety during precipitation of water and heavy rainfall .Most of the conventional wiper systems which have been used in buses until now do not completely wipe off the rain droplets still leaving blind spots at the top corner filleted portions. Especially in district buses in South India where still only one wiper is used at the top right corner, wiping a mere 30% of the whole windshield area. Blind Spots are regions which acts as a hindrance to the view of the ...
Gr. Noida, Uttar Pradesh
Aim- To increase the corner stability (at a time line change on the road), reduce the turning radius of vehicle.
Purpose- Parking vehicle inside small space and take a turn in small radius
Brief- Mostly vehicle are controlling via front two wheels but in my project the rear wheel will be equally responsible in steering system. In which is created two situations:
1- Rear wheel turns in opposite direction of front wheel at an angle of front wheel from the straight position of wheel. Result: decrease the turning radius of vehicle and park in small space.
2- Rear ...
Jun 22, 2017
The Active Suspension is one that can be useful for Supercars which utilize their Active suspension for maintaining center of gravity as low as possible, so that on the corners the car won't skid. It functions in such a way that whenever the Driver steers around the corner either left or right then the suspensions of left side of the car will pull the chassis of the vehicle to its optimum level so that appropriate amount of drag is generated on the car and hence the car will be glued to the track giving maximum grip and downforce for ...