It is an highly sensitive device for detecting the explosives and its traces. It is a portable device and it can detect the explosives traces for longer range. For protection and security from terrorist attacks, it can be highly preferable to identify the explosives and it's traces even in a huge crowd. Sensors with high range and sensitivity are used to have best performance. Highly optimized for best ...
1)Our brain filled with neurons, individual neuron cells connected to one another by dendrites & axons.
2)The Axons is long projection of nerve that can reach a length of tenth of centimetres, that conveys electrical pulses from the dendrites or Soma of neuron to next neuron . They have high variability of branching pattern and extend.
3)The signal are generated by difference in electric carried by ions on membrane of each neurons.
4)One of the most exciting areas of BCI research is the development of devices that can be controlled by thoughts. Some of the ...
Gandhi Nagar, Kapadi Taluk, Vellore-632006., Tamil Nadu
This project is about the concept of a new engine called variable volume engine. In the variable volume four stroke engines, during the suction stroke there will be one volume and during other three strokes, there will be another volume. Thus the volume of variable volume engine is not constant.
The main aim of this type of engine is to achieve a combined advantage of variable compression ratio and supercharging. It is observed that overall efficiency of the engine is also increased. Thus variable volume engine has the advantage of increased volumetric efficiency due to supercharging and increased ...
The objective of the project is to make an assistive limb to assist human beings in some or other activity, eliminating human errors and increasing productivity. The most common activity humans perform, be it a soldier or an industrial worker or a rural woman, is weight lifting and that is what we aim to target. The idea is to make an exoskeleton which will help human beings lift heavy weights without feeling any load/stress on the human muscle. The prototype made when worn by a human can successfully lift up to additional 40kgs with the one arm.
The exoskeleton is ...
Rajapalayam, Tamilnadu, Tamil Nadu
The main objective of the project is to identify the water flowing in the tap when it has opened when there is no water.. When there is no water in the water tank, the people forget to close the tap at the time. Because normally they may not close the tap while there is no water in the tank. Due to these issues the water is getting wasted while refilling of the water tank. Every drop of water should be conserved; we are in need to give the solution for this problem. In which we are able to ...
Two-stroke engines have two important advantages over four-stroke engines: They are simpler and lighter, and they produce about twice as much power. So why do cars and trucks use four-stroke engines? There are four main reasons:
• Two-stroke engines don't last nearly as long as four-stroke engines. The lack of a dedicated lubrication system means that the parts of a two-stroke engine wear a lot faster.
• Two-stroke oil is expensive, and you need about 4 ounces of it per gallon of gas. You would burn about a gallon of oil every 1,000 miles if you used a ...
For small scale workshops, it would be costlier to buy & install huge machines which would be suitable for performing singular & precise operations alone. Moreover, in these small scale workshops, job type or batch type of production process is carried out, which always insists the need for developing a multiplex prospect machine, which paves a way for doing these operations & production processes in an economical manner. The portable hybrid powered intelligent special multiplex prospect machine consists of mechanisms for five different tools for performing diverse operations including drilling, grinding, sheet (including plates & switch boards) cutting, shaping ...
The present invention is in the technical field of mechatronics. More particularly, this invention is categorized in the field of aerial and ground robots. This robot is a multi-role robot doing both aerial and ground missions.
A robot is an electromechanical machine. It gains the control signals from the sensors and by processing the signals it reacts in a predefined algorithm. This invention is a multi-role or a multi-functional robot. It has a ground mode and a flight mode.
Aerial robots or drones can only fly. The ground robot or UGV can only move on the ground. ...
The current invention is an improvement in basic measuring instruments. Like my other disclosure " Optical Illuminated Rule, " it is especially suited to the visually challenged. As with my other design the linear divisions are every 1/16". The uncluttered divisions make it easy to read. Despite the fact that the scale is in 1/16" divisions, it is possible to interpolate measurements to 1/64" without being taxing on the eyes.
The invention consists of a series of kerfs. The kerfs are spaced precisely 1/16" apart and the width of the slot is exactly 1/32". For a millimeter scale, ...
Vancouver, British Columbia
Jun 30, 2017
Gear systems are one of the oldest and most iconic forms of engineering. They have been studied for so long and by such great minds (Archimedes, da Vinci, etc.) that breakthroughs are rare. Mainstream technologies include the Cycloid (circa 1970), Strain Wave (circa 1950), and Planetary (circa 100 BC) drives. The Orbitless (pat pend) drive is the first new low-ratio drive since the Planetary which shares many features such as torque splitting and co-axial drive shafts that spin in a common direction. However, it has advantages such as lower production cost and lower internal speeds leading to much higher ...