The use of tiny sensors makes possible the insertion, in this case built into the steering wheel of a car, of an alcohol detection device that will interact with the ignition system of a vehicle. In association with a timer, relays and GPS will complete the design. Depending on the amount of alcohol consumed by the driver, this device will perform a blocking action that will prevent the start of the car and through GPS conditioning send an alarm or signal to the police in order to pinpoint the driver location under influence of alcohol.
This last assumption is ...
Gestures. Few consider it is a point of situation where you need to act yourself to make a bridge for communicating with another person. But for some it is the only source of communication.
The fact that more than 70 million people across the globe are speech and hearing impaired affected me in a way I could not put in words hence I decided to come up with a solution that translates hand gestures into real time speech. Overall a revolutionary device.
It’s a gesture recognition based device which not only serves and boosts confidence of speech impaired individuals ...
My idea is about replacing the old fashioned wooden blackboard with foldable OLED and calcite chalk with electronic or digital pen.
Foldable OLED can be folded and refolded more or less 100,000 times without picture creases. Foldable OLED is sold in consumer's market but its full use is not yet fully realized.
The link to the video below is a property of "CNET" YouTube ...
In this project, load cell is used as a weight sensor. This sensor will be placed below the LPG gas cylinder. GSM module is to send SMS to owner as to inform about weight and leakage of cylinder and to gas agency for booking of the cylinder.
This project is used to monitor continuous weight of the LPG cylinder and detect the leakage. If any gas leakage occur, the regulator automatically switches off . When the gas cylinder gets emptied, this system book the cylinder automatically and informs the gas booking to the ...
Digital Bus System
Name of the Project : Digital Bus System
Objectives of the Project : The Ultimate motto of the project addresses all the problems that were faced by the existing MSRTC bus system . Coming to the
feasibility aspect the current project focuses on
1) Economical Feasibility
2) Technical Feasibility
3) Operational Feasibility
Deliverables/ Functional Specification:-
1. Current Administrators 2.Passenger/Customers 3. Details of the services.
4. Timings, Source, Destination details. 5.Android application
Now a days everything is being automatic using technology . The Digital Bus System project is being developed for the use of MSRTC and bus passengers.
-Android application :
The standard silicon on isolator (SOI) wafer has suffered from low thermal conductivity and, as result, from bad power performance. There are 2 reasons: low thermal conductivity of BOX(10W/K*m) and low thermal conductivity of host Silicon wafer (130W/K*m). If to change the BOX and Si by 3C-SiC (480 W/K*m) the power performance of Si devices will be improved in 3 times and leakage current reduced by 50%. New Si on SiC (SiSiC) wafer will be compatible with regular Si wafer ...
Frequent determination of glucose concentrations in diabetic patients is required for diabetes management. This requires repetitive finger pricking. Use of non-invasive detection techniques offer several advantages, such as absence of pain, exposure to sharp objects and tighter control of glucose concentrations. These potential advantages have led to considerable interest in the commercialization of NI glucose monitoring devices. Several techniques have potential leading to viable measuring devices. One promising technique for monitoring blood glucose concentration is to use optical absorption spectroscopy. This project targets the detection of glucose concentration in blood using Infrared absorption spectroscopy, which will be amicable for ...