Aerospace & Defense

Order by: [ Title ] [ Date ] [ Views ]

The Tumble Thruster Module (TTM) concept utilizes the high energy reaction of igniting a solid cartridge of Magnesium (Mg) together with injected Xenon(II) Floride (XeF2). The resulting Mg/XeF2 (also known as MAX) propellant combination stems from a 2008 paper on spectra research of the high energy density material by Ernst-Christian Koch [1]. The TTM combines the solid rocket motor with a controlled additive in a system also known as a hybrid rocket. This variant of the hybrid rocket is non-throttlable meaning once ignited the reaction continues until all the reactive propellant combination is burnt. What is controllable is the total amount of additive propellant introduced to the system prior to ignition and as a result the amount of energy ...

A parachute canopy is supported at its central hole by a large ring that contains a centrifugal fan, which is mounted on suitable bearings attached to the ring. The fan is supported on bearings and is arranged for it to rotate about a vertical axis. Intake air is drawn in above the canopy by this fan, creating a low pressure which pulls the canopy upwards. This air is blown out radially below the canopy, The shape of the canopy turns the air-flow downwards, creating higher pressures inside the canopy, which increase its vertical lifting force. The motor that drives the fan is mounted below the canopy, with a vertical drive shaft between the motor and the centrifugal fan.

The ...

The haptic puppet is a human participant linked to a hydraulic humanoid (avatar) with full proportional feedback. This is accomplished by a wireless synchronized system of near real-time bi-directional proportional feedback. The technical name is an Electro-Hydraulic Interactive Double Feedback Loop.

Two devices, one being a mechanical suit for a person, the other being a mechanical humanoid (avatar), incorporates matching sets of hydraulic actuators for inducing movements. Each actuator in a given device along with a system of electronic sensors and hydraulic valves, in conjunction with a central processing and control system, keeps track of the physical positions and configurations of the actuator and the corresponding actuator in the other device, and what the status of the actuators should ...

IMPLOTURBOCOMPRESSOR; One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implosion - Only One Compression Step; Inflow, Compression and outflow at one simple circular dynamic motion Concept.

*·“Excellence in Design" because is only one moving part. Only one unique compression step. Inflow and out flow at the same one system, This invention by its nature a logic and simple conception in the dynamics flow mechanics area. The invention is a wing made of one piece in a rotating motion, contained in a pair cavity system connected by implocavity, and interacting dynamically with a flow, that passes internally "Imploded" through its simple mechanism. This flow can be gas (air) or liquid ...

Featured Project Development - State of the Art Novel InFlowTech;
1-Gearturbine RotaryTurbo:

*1-GEARTURBINE PROJECT
Rotary-Turbo-InFlow Tech
Atypical InFlow Thermodynamic
Technology Proposal Submission
Novel Fueled Motor Engine Type

State of the art Innovative concept Top system Higher efficient percent.*Power by bar, for Air-Planes, Sea-Boats, Land-Transport & Dynamic Power-Plant Generation.
-Have similar system of the Aeolipile Heron Steam device from Alexandria 10-70 AD. -New Form-Function Motor-Engine Device. Next Step, Epic Design Change, Broken-Seal Revelation. -Desirable Power-Plant Innovation.

YouTube; * Atypical New • GEARTURBINE / Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Thrust Way Type - Non Waste Looses

The present invention relates to a compression and pushing motor characterized in that it is composed of a housing, said housing accommodates a rotor rotating in its internal space supported by ...

This magnetic lifter drone robotic aircraft.

This Small drone aircraft is based on WW2 designs used by the German Military that were recovered during The 1947 project Operation High Jump . In that time period computer science was not available as it is today which was the Reason the German militrary had limited sucess with as it was very difficult for the pilots to manually fly these devices which were driven by a series of Gyroscopes causing Ionic lift not unlike what is currently in use by the B 2 Bomber AND OTHER INTERNATIONAL military aircraft which also use jet engines to assist in the propulsion system . A computer conrtolled Drone using this propulsion system could be used ...

This project is about doing an experiment on circulation of light. It is known that mirrors can reflect light and there is a device called the periscope used for this purpose. The mirrors of a periscope are fixed 45 degrees to reflect light. What if we place four mirrors at an angle of 45 degrees as seen in the picture and shine a light on one end as seen in the figure. Assuming that the media is ideal and the mirror can reflect 100 percent and if we move the light source away from the mirror faster than the speed of light, does the light rays keep circulating? This project is only some part of the project I am ...

A smart military tactical scope attachment that pairs to a smart visor attachment. The scope/visor attachments are equipped with 3D sensory cameraa and encrypted wireless signal reciever/relays. The 3D sensory cams functions pair to the smart scopes displays functions. The incrypted wireless signal receiver/relay pairs to the smart tactical scope/visor. The encrypted wireless signal receiver relay wirelessly pairs to other encrypted ID numbers/signals. The encrypted numbered ID signal pairing to other wireless pairing signals allows the operator/military personnel to view a target/targets through the smart scope/visor to see if the potential target is friendly or not. Encrypted ID signal once received and verified by command center pings a instant verification notification to said military unit. Military unit can use ...

Automated/controlled deployment stretcher barrier wall or DSBW for short. Designed as a remote operated/Autonomous mobile deployment stretcher barrier wall the operator/user has full control capabilities allowing user to minipulate the defensive barriers movement via control center and or a wireless military touch control wrist monitoring device. The wrist monitor has a wireless password protected ID that pairs to the defensive stretcher wall barrier to gain access for control functions. User/operator has ability to view the defensive barriers 3d sensory cameras in real time through the wrist monitor or via control center. DSBWs panel flaps are manafactured as a harden steel/kevlar composite material. DSBW has crawler tracks for maximum grip/movement in all conditions. DSBW has a built in stretcher that ...

United Aircraft Technologies (UAT) is developing a smart aircraft Inter-Connecting Clamp (ICC) solution with an Augmented Reality Monitoring System (ARMS) for aircraft wiring that improves fuel economy (overall weight reduction of the aircraft), decreases the occurrence of Repetitive Strain Injuries among the workforce, simplifies maintenance through 3D fault location and visualization, and reduces the environmental impact of CO2 emissions.

This technology has the ability to revolutionize equipment readiness. A solution that uses Artificial Intelligence (AI) and Machine Learning (ML), blended with Augmented Reality (AR) that would replace the old, rubber coated clamps/brackets and associated hardware that hold wire bundles today. The old clamps often get bent out of shape and the rubber coating wears off exposing the metal band, ...

Page 5 of 8