2020
Electronics/Sensors/IoT
In the recent time of the global pandemic, it was observed that the world is incapable of handling pandemic situations like COVID-19. The primary factor which leads to a catastrophic level pandemic is overpopulation (also dense population) & contemporary lifestyle of humanity.
Concentrated heat loads i.e., very high heat fluxes from electronic components present significant thermal management challenges in defense, space, and commercial applications. Such high heat fluxes increase the temperature of components beyond permissible operational limits.
PrintIC is a unique technology for the realization of integrated circuits and system made only with carbon-based materials and employing only standard printing techniques (e.g. ink-jet, flexo, screen,...) that has been developed by FLEEP Technologies S.r.l., spin-off of the Italian Institute of Technology,
The $165bn pa memory market is dominated by DRAM ($100bn) and NAND flash ($60bn). DRAM’s high speed (compared to Flash) at low cost (compared to SRAM) has made it the main memory in all computers and electronic devices. However,
Let’s sit down for a minute and give this thing a thought!
How many liters of water are you consuming in a day? Is it enough to help your body cope up with the blazing heat the sun has been nourishing yet killing us with?
Avalanche photodiodes (APD's) offer increased sensitivity over photodiodes. Applications such as Lidar and fiber optic communications experience significant performance improvements by taking advantage of the higher sensitivity afforded by APD's.
However, APD's require a high voltage bias of ~50V to 600V or higher.
Catastrophic failure concerns of Li-ion batteries including excessive heating, fires and explosions create anxiety in battery consumer markets, especially as larger and more powerful Li-ion battery architecture hits the marketplace.
The main cause of failure is the internal short-circuit,
We see so much waste in rivers, canals, lakes nowadays. And there are many ways to clean them but using of this aqua bin which uses IoT technology makes us easier to do our task. Mostly the lower wait particles,
Based on an operational prototype system (Intelipod™) developed internally by Venti LLC, this SBIR effort will deliver a quantum improvement in fire fighter safety. This project represents a major advance in the tools available to first responders/fire fighters to access and safely respond to unknown emergencies,
Micro-mass sensors can be used for the detection of gases, organic cells, viruses and bacteria in a system. With today's growing need for immediate detection of viruses such as COVID-19, micro-mass sensors have become a viable and attractive option.
Page 1 of 6