Metabolic towers are unmanned facilities located in in an urban environment . Their functions are as follows:
Collect differentiated waste (paper, glasss, plastic, metal, other) for processing and recycling
Collect organic wastes for incineration process to generate energy
Collect sanitary water from neighbouring buildings for decontamination,
In 1923 Professor Paul Biefeld and his student Thomas Townsend Brown discovered this effect during the test of a new type of capacitor. Basically the Biefeld Brown effect is electro gravitation.
3D Precision Irrigation™ (3PI™) is an autonomous, sensor-based, data-driven, irrigation system that automatically adjusts irrigation cycles to the changing needs of the plants and trees that it monitors.
My mission is to help farmers and other growers maximize their return on resources while conserving water, preserving soil,
The basic idea is to replace the differential gear of the axle by two CVTs (continuous variable transmission), one on each half wheel shaft, whose electric machines are working on torque regulation with close torque set points.
The process of soil damage and vegetation loss often begins with the activities of overgrazing animals. Grazing livestock sometimes consume plants down to the ground. This activity weakens the individual plant with a reduction in tissues capable of photosynthesis; its growth is greatly inhibited. In addition,
What we are currently doing is NOT good enough. Climate goals are being postponed while energy consumers are being tapped dry. I suggest we look at the home energy ecosystem. This ecosystem provides not only electrical energy, also temperature control and charges the electric car.
Communication in space is becoming increasingly critical, be it between satellites, from satellites to ground or even to/from the Moon or Mars. Current approaches use radio waves that spread quickly resulting in very small capacity: The data rate from the Mars orbiter is a few kbit/s,
The initial application of the gun lock shall be to modify a simple service revolver, whereupon the stock components are to be removed from the frame. A hole for the pawl is drilled into back of the trigger guard,
Use atmospheric water generator powering by solar cells;
Then use a small nuclear reactor to convert water to steam to power an electric generator;
Re-condense water vapor into water using heat exchangers;
Use the electricity to power two fan duct motosr to push it onwards.
Page 1 of 4