MEOOPS (Magnetic Energy Octagon Oscillator for Power Source) began with MEAMOMU (Magnetic Energy Automaton Oscillator for Multiple Uses) and then upgrades to MEOOPS using programmable magnetic topology for opening and closing pyrolytic carbon valves. Now, MEOOPS-MAG uses MEOOPS or MEAMOMU integrated into a cylinder battery casing for propelling an enclosed electromagnetic coil creating either a motor, voltage amplifier, or generator. MEOOPS harnessing the power of magnets, not just for levitation, but to build a mechanical oscillator that could scale from a micro device to an industrial powerhouse device.

Prof. Laithwaite proved of two same strength and polarity linear permanent magnets if you divert at least one of the two far-end coupled flux polarities from the magnetic steel coupler, causes all four of the coupled fluxes to become uncoupled and repel. General Electric Excursions in Science #2 proved magnets with equal flux attractive pull strength can push or pull an object into one’s flux path including Pyrolytic Carbon.
UCLA lectures proved Pyrolytic Carbon and Bismuth repels both magnetic flux polarities.

MEOOPS uses permanent magnets only for mechanical oscillations, scalable to any size, which pump actions also produces electrical power using piezoelectric, triboelectric, conductive induction and GERTAM (Gel Electrocytes Recharged by Triboelectric Anion Membranes) for VEH valance electron harvesting. Two magnets are motioned to a magnetic steel coupler orb due to its encapsulating pyrolytic bellow valve being open and allowing magnetic flux attraction. As the magnets arrive on a pyrolytic encapsulated rod in the center of the traveling magnets, they close each other’s pyrolytic bellow valve covering the flux flow of the far-end magnets flux on the magnetic steel coupler orb. The previous action causes the opposing magnet to simultaneously open its far-end magnetic steel coupler orb’s pyrolytic bellow valve using tethered non-repulsive diamagnetic acrylic rods, thus creating reverse magnetic motion. The opening and closing of the pyrolytic bellow valves create constant magnetic oscillation in all of the eight sections. Copper solenoids can be placed above each magnet oscillating section along with halve orb-shaped piezoelectric sucrose (C₁₂ H₂₂ O₁₁) material that cover the magnetic steel orbs and are compressed by the approaching magnets, for the creation of dual output voltage. All eight sections use magnets of the same flux or pull strength. All eight sections of the octagon structure are encapsulated by non-repulsive diamagnetic Teflon tubes.