2024 Contest Now Accepting Entries!

Submit your best new product ideas for a chance at $25,000, other great prizes, and global recognition. If you already are registered, log in to access the entry form. Otherwise, click here to get started.

Help build a better tomorrow

Since Tech Briefs magazine launched the Create the Future Design contest in 2002 to recognize and reward engineering innovation, over 15,000 design ideas have been submitted by engineers, students, and entrepreneurs in more than 100 countries. Join the innovators who dared to dream big by entering your ideas today.

Read About Past Winners’ Success Stories

Special Report spotlights the eight top entries in 2023 as well as past winners whose ideas are now in the market, making a difference in the world.

Click here to read more

A ‘Create the Future’ Winner Featured on ‘Here’s an Idea’

Spinal cord injury affects 17,000 Americans and 700,000 people worldwide each year. A research team at NeuroPair, Inc. won the Grand Prize in the 2023 Create the Future Design Contest for a revolutionary approach to spinal cord repair. In this Here’s an Idea podcast episode, Dr. Johannes Dapprich, NeuroPair’s CEO and founder, discusses their groundbreaking approach that addresses a critical need in the medical field, offering a fast and minimally invasive solution to a long-standing problem.

Listen now

Thank you from our Sponsors

“At COMSOL, we are very excited to recognize innovators and their important work this year. We are grateful for the opportunity to support the Create the Future Design Contest, which is an excellent platform for designers to showcase their ideas and products in front of a worldwide audience. Best of luck to all participants!”

— Bernt Nilsson, Senior Vice President of Marketing, COMSOL, Inc.

“From our beginnings, Mouser has supported engineers, innovators and students. We are proud of our longstanding support for the Create the Future Design Contest and the many innovations it has inspired.”

— Kevin Hess, Senior Vice President of Marketing, Mouser Electronics

Follow Create the Future

Solar Water Distiller Using Spray Flash Evaporation

Votes: 0
Views: 9173

This device is a solar water distiller for producing ultra-pure drinking and cooking water using a new operating principle involving a spray water feed which flash-evaporates, yielding high efficiency and the ability to tilt the unit toward the sun throughout the year. Most previous solar distiller designs were of the basin type where the water sits flat in a basin. This has two disadvantages: a high thermal mass of water which heats slowly, and a reduced solar input in winter months. By spraying a fine mist of water onto a hydrophobic liner tilted toward the sun, the small droplets remain suspended and do not run down due to the high surface tension of water. The black liner operates at near stagnation condition and easily achieves surface temperatures over 220 F. Thus the droplets flash-evaporate immediately. A central spray head sprays the liner with a quick pulse of water controlled by a solenoid valve. A temperature sensor below the liner interfaces to a timer circuit which increases water pulse frequency as temperature increases. The timer circuit is powered by a small inexpensive thin-film PV panel which stores its energy in a 33,000 UFD capacitor, eliminating the need for a battery or AC power.

The internal liner is a fluoropolymer film whose non-stick property prevents scale deposits from bonding, making cleaning very easy, quick, and infrequently required. The glass glazing is hinged for cleaning with a paint brush once per month or longer. The units can be bolted together in a linear array and cleaned automatically with no labor by introducing a low cost dry acid into the feed water. The rear legs can be replaced by threaded rod driven by a small 12v DC gearmotor allowing the tilt angle of a large array to be changed easily. A reflector can be mounted to the back increasing output by more than 50%. This relatively small 4 ft. square unit produces approximately one gallon per day which is approximately 50% more than an equivalent basin unit. The unit will purify almost any feed water including sea water. While this technology is not cost-effective for large scale desalination, it may be ideal for small scale systems. The estimated useful life is over 20 years with a very high reliability level.

Because the product water does not boil and benefits from UV exposure, its subjective taste quality is outstanding with a pure, smooth, appealing character which most people find addictive. The user has the option of restoring natural calcium and magnesium levels beneficial to health by adding a tiny amount of dolomite powder to a gallon of product water.

Lack of clean drinking water is a major cause of disease and mortality throughout the world. This technology is not the universal solution to that problem but it can offer a low cost choice along with other technologies to help people improve their lives. Patent Pending.

  • Awards

  • 2012 Top 100 Entries

Voting

Voting is closed!

  • ABOUT THE ENTRANT

  • Name:
    Jerry Rosenberg
  • Type of entry:
    individual
  • Patent status:
    pending