Energy, Power & Propulsion
It has been discussed earlier that when a body slides down an inclined plane with angle of inclination less than 45° the downward and forward motion of the body can be restricied by a thread or support perfectly parallel to the horizontal so that a portion of the weight of the body is not supported even at the position
INTRODUCTION
The Sensor-Controlled Gravity/Buoyancy Power Pit Generator is an innovative renewable energy system designed to operate efficiently in any geographic location, overcoming the limitations of conventional renewable sources such as solar, wind, and hydroelectric power, which are highly dependent on specific weather conditions. Unlike these traditional systems,
Conventional solid polymer electrolytes used in lithium-ion batteries often perform poorly due to structural limitations, particularly poor contact with electrodes, and they fail to prevent the growth of lithium dendrites—needle-like structures that form during charging cycles and can cause short circuits, fires, or explosions.
To address these issues,
According to the Scientific Service of the German Bundestag, the energy transition will cost around €13.3 trillion by 2045, more than three times the gross domestic product. The assumption made there that renewable electrical energy is available almost all the time is misleading. It ignores the importance of the thermodynamic potential of fuels for grid stability.
In modern power plants, machinery operates under high stress and extreme conditions, making fault detection a critical component for maintaining efficiency and safety. This project introduces an AI-based fault detection system tailored specifically for power generation units such as turbines, motors, and boiler feed pumps.
Overview
Introducing the Trifecta Energy Harvesting System: a patent-pending, fully additively manufactured platform revolutionizing energy capture by efficiently collecting electromagnetic, thermal, and mechanical energy within a single, flexible printed architecture. By seamlessly combining these functions into a thin, conformal structure, the system replaces separate, bulky energy harvesters,
Integrated and flexible process schemes are proposed for utilization of CO2 as a sustainable feedstock with the objective to mitigate its harmful environmental impact. The selection of appropriate process configuration for a given location would require techno-economic evaluation and life-cycle assessment.
Hydrogen Generation by DC/ Pulsed Electrolysis with Smart Materials Enhanced by Magnetic Field.
N. Kukhtarev, T.Kukhtareva, 2247 Fargo St. Los Angeles
There is worldwide need for environmental-friendly affordable sources of energy. Hydrogen is attractive candidate for an energy source that can be produced by electrolysis of water.
Breakthrough Propulsion Program -Asymmetrical thrust demonstrated
NASA seeks to find an inertia style thruster (Breakthrough Propulsion Program BPP, 1996 – 2002). The proof of concept in the attached drawings depicts a simple mechanism, self contained, that produces an asymmetrical thrust that results in a velocity of 30 ft/sec (about 24 mph) in this example.
The EM Sektet Thruster is a novel propellantless electromechanical propulsion system that generates net thrust by exploiting the principles of electromagnetic induction—specifically Lenz’s Law—in a way that transfers momentum internally within the system. Unlike conventional propulsion systems, which require the ejection of mass (propellant) to generate thrust in accordance with Newton’s Third Law,
Page 3 of 8