Congratulations to Our 2024 Grand Prize and First Place Winners!

NETrolyze, a novel immunotherapy for triple-negative breast cancer (TNBC), was named the $25,000 grand prize winner at a live finalist round held November 15 in New York. The first-in-class therapeutic injectable gel prevents the spread of TNBC, one of the most aggressive cancer types, enabling patients to avoid toxic chemotherapy and expensive treatments – potentially transforming their lives. Click here for the full list of 2024 winners. Also see the Top 100 highest scoring entries.

Special thanks to our esteemed panel of judges.

Help build a better tomorrow

Since Tech Briefs magazine launched the Create the Future Design contest in 2002 to recognize and reward engineering innovation, over 15,000 design ideas have been submitted by engineers, students, and entrepreneurs in more than 100 countries. Join the innovators who dared to dream big by entering your ideas today.

Read About Past Winners’ Success Stories

Special Report spotlights the eight top entries in 2023 as well as past winners whose ideas are now in the market, making a difference in the world.

Click here to read more

A ‘Create the Future’ Winner Featured on ‘Here’s an Idea’

Spinal cord injury affects 17,000 Americans and 700,000 people worldwide each year. A research team at NeuroPair, Inc. won the Grand Prize in the 2023 Create the Future Design Contest for a revolutionary approach to spinal cord repair. In this Here’s an Idea podcast episode, Dr. Johannes Dapprich, NeuroPair’s CEO and founder, discusses their groundbreaking approach that addresses a critical need in the medical field, offering a fast and minimally invasive solution to a long-standing problem.

Listen now

Thank you from our Sponsors

“At COMSOL, we are very excited to recognize innovators and their important work this year. We are grateful for the opportunity to support the Create the Future Design Contest, which is an excellent platform for designers to showcase their ideas and products in front of a worldwide audience. Best of luck to all participants!”

— Bernt Nilsson, Senior Vice President of Marketing, COMSOL, Inc.

“From our beginnings, Mouser has supported engineers, innovators and students. We are proud of our longstanding support for the Create the Future Design Contest and the many innovations it has inspired.”

— Kevin Hess, Senior Vice President of Marketing, Mouser Electronics

Follow Create the Future

Micro Sun

Votes: 0
Views: 6416

Saving energy is similar to creating energy in this way: if someone saves 1 KWH of energy then there is no need to produce that 1 KWH. This alleviates pollution and helps in carbon credit.

At present, there is a great need for an ultra high efficiency light source (Lumen per Watt), long life (hours), affordable cost ($) and use of minimum (close to zero) toxic materials like mercury.

Incandescent bulbs are notoriously least efficient, producing about 12 Lumen per watt. Their life is also much shorter, at about 1,000 hours. The Compact Fluorescent Lamp (CFL) may have higher efficiency of about 40 Lumen per watt but their color rendition is undesirable. Also they contain anywhere from 5 to 15 milli grams of mercury. Due to this reason, even after 30 years of their introduction they have penetrated only about 15% in the market. The white LED bulbs are a recent phenomenon. This has no mercury, a longer life span of about 25,000 hours and about 40 to 60 Lumen per watt. But it has a major drawback. It produces a lot of heat. The reason for this is that any white LED contains 3 Chips, Red-Green-Blue located at a tiny space. To get rid of this heat it needs aluminum heat sink. This makes it very expensive. Also, in the market it is hard to see any LED bulbs whose output is more than 400 lumen, same as a 40 Watt Incandescent. Further, LEDs are point light. This cannot be used as a household bulb shedding light all around 360 degrees like CFL or incandescent bulb. Generally they are able to shed light in about a 120 degree area.

Micro Sun overcomes all these problems because the light source in this is an ionized gas plasma contained in a tiny quartz bubble of 3 mm. A special mixture of gas with 0.2 Micro gram trace of mercury is ionized in the presence of high electric field. This ionized plasma is similar to sunlight. The 0.2 Micro grams usage means, whatever minimum amount of mercury it takes to make just ONE CFL is enough to make 25,000 Micro Suns. Therefore its environmental impact is minimal when considering its other advantages.

Micro Sun produces 80 Lumen per Watt. The quality of light is similar to cheerful daylight. The life is up to 12,000 hours. Further, its patented design allows the bulb part to be easily separated from its electronic ballast base. This means when eventually the bulb burns out then only replace the bulb retaining the expensive electronics which has more than 50,000 hours life. Unfortunately, both in CFL and LED bulbs, the base from the bulb cannot be separated. Therefore, when the bulb burns out then the expensive, still good electronic ballast is also thrown out along with the bulb. Micro Sun retails at a price similar to a good CFL. This means it is about 30% price of a LED bulb for similar brightness (Lumen).

Considering all these features, it is very logical to think that Micro Sun may replace a substantial percentage of other electrical luminaries in near future.

  • Awards

  • 2012 Top 100 Entries

Voting

Voting is closed!

  • ABOUT THE ENTRANT

  • Name:
    Shaam Sundhar
  • Type of entry:
    individual
  • Profession:
    Engineer/Designer
  • Number of times previously entering contest:
    1
  • Shaam's favorite design and analysis tools:
    CAD
  • Shaam's hobbies and activities:
    Inventions
  • Shaam is inspired by:
    My Logo: Find a hurt, heal it. Find a need, fill it. TM
  • Software used for this entry:
    CAD
  • Patent status:
    patented