Macjames® Multisurface Degreaser/Cleaner for multi-surface/multipurpose degreasing and cleaning of all washable surfaces.
Macjames® Multisurface Degreaser/Cleaner is an innovative and economical multisurface/multipurpose degreaser/cleaner with concentrated strength to clean organic and inorganic dirt from all washable surfaces. It is an emulsifying non-solvent and non-acidic based degreasing foaming surfactant cleaner. It emulsifies grease, oil, rust, heavy dirt, carbon deposits, grime, slag, sludge, mud, scales, others alike and cleanses them from the various washable surfaces (metal, plastic, wood, concrete, rubber, PVC, etc) without deforming them (substrates). It can be guided used in cleaning and washing of fabric, upholstery, leather, canvas, etc ,with a dilution of 1part to 5parts water (1:5), depending on level of soil. It was researched, developed and manufactured since acidic, petroleum distillates, solvent and solvent-based cleaners are found to be destructive and inefficient in most surfaces.
Macjames® Multisurface Degreaser/Cleaner was registered by NAFDAC (Reg. No.:02-8179L) on August 6,2013 and introduced into market in October 2013.
Macjames® Multisurface Degreaser/Cleaner is used in degreasing and cleaning machine parts, car engines, heat exchangers, workshop, machines, abattoirs, Silos, tanks, reservoirs, drilling and mining equipment, farming and construction equipment, marine and dredging equipment, oil rigs and superstructures, petrochemical and refineries, and other heavily soiled areas or equipment. It could be carefully used for rugs and upholstery, and thick fabrics cleaning at a dilution rate of 1:50 parts of water. It is applied on the substrate by hand brush, spray gun, or rag-cloth using hand gloves and goggles, and then washing or flushing with water thereby returning the soiled substrates' surfaces to its natural clean state.
1. Use on all washable surfaces.
2. Spray, apply with brush, or soak soiled surfaces and substrates.
3. Allow solution to penetrate for 1-5 minutes, depending on soil level.
4. Rinse or flush with clean water.
HEAVY GREASE AND SOIL: Use full strength concentration.
MEDIUM SOIL: Use 1:5 parts water to 1:10 parts water dilute solution.
LIGHT CLEANING: Use 1:10 parts water to 1:40 parts water dilute solution.
IN THE RIGHT DILUTION,POWER OR PRESSURE WASH CAN BE USED ON SURFACES AND INACCESSIBLE SOILED AREAS.
PRODUCTION AND RAW MATERIALS:
Macjames Multisurface degreaser/cleaner is produced using simple, cost-effective but effective environmentally friendly chemical ingredients, like Sodium lauryl Sulphate, Hypochlorite-5%, deodocylbenzene sulphonic acid, Sodium Hydroxide, among others.
A simple manual or motorized mixer can be used to do the production very easily by adding the chemical ingredients in appropriate sequential order. The chemical raw materials are readily available and cheap.
MARKET AND DEMAND
It has wide cleaning applications in auto, marine, oilfield, petrochemical and refineries, homes, farm, construction, dredging and others alike. Therefore the needs and demands in these areas make it to have a huge market.
Attached are product sample and car engine (example of substrate with different component materials) degreased and cleaned with Macjames® Multisurface degreaser/cleaner (before and after).
DEGREE OF HAZARD
0 - Insignificant
1 - Slight
2 - Moderate
3 - High
4 - very high