Energy, Power & Propulsion
The increasing global demand for clean and sustainable energy sources has driven the exploration of innovative technologies. This novel approach to generating renewable electricity by harnessing the force of gravity. The system utilizes a circular arrangement of water-filled chambers equipped with inflatable balloons, employing a unique design to create a weight imbalance that drives rotational motion.
It has been discussed earlier that when a body slides down an inclined plane with angle of inclination less than 45° the downward and forward motion of the body can be restricied by a thread or support perfectly parallel to the horizontal so that a portion of the weight of the body is not supported even at the position
Hydrogen Generation by DC/ Pulsed Electrolysis with Smart Materials Enhanced by Magnetic Field.
N. Kukhtarev, T.Kukhtareva, 2247 Fargo St. Los Angeles
There is worldwide need for environmental-friendly affordable sources of energy. Hydrogen is attractive candidate for an energy source that can be produced by electrolysis of water.
This improvement of an aerofoil compensates for side winds.
Large trucks produce excessive greenhouse gasses due to inefficient reciprocating engines and complicated gearboxes. This hovercraft would be much better because it eliminates friction with the road surface due to flexing tyres and suspension. It can also run on alcohol, a non fossil fuel, which can be produced from corn.
Integrated and flexible process schemes are proposed for utilization of CO2 as a sustainable feedstock with the objective to mitigate its harmful environmental impact. The selection of appropriate process configuration for a given location would require techno-economic evaluation and life-cycle assessment.
Governments worldwide are increasingly prioritizing the use of renewable energy due to environmental concerns, the finite nature of fossil fuel reserves, and their rising costs. Although various innovative solar thermal systems have been proposed in the literature, most are typically bulky and require a separate thermal energy storage unit.
We've developed our unique SRM as a prime-mover, converting DC electrical energy from the solar panels into mechanical energy. This mechanical energy is then transferred via direct coupling to an electrical generator which converts the mechanical energy into clean electric power free from harmonic distortion. Our SRM is efficient, compact and reliable.
We have developed a microwave reactor.
Our proposal is a multi-emitter microwave device that captures gases, CO2 from engines, and reforms them into calcium carbonates, And The Calcium Carbonate is of high value for gas and oil drilling. Since it saves money by preventing drilling fluids from being lost in cracks, when trepanning.
Page 4 of 8