Congratulations to Our 2024 Grand Prize and First Place Winners!

NETrolyze, a novel immunotherapy for triple-negative breast cancer (TNBC), was named the $25,000 grand prize winner at a live finalist round held November 15 in New York. The first-in-class therapeutic injectable gel prevents the spread of TNBC, one of the most aggressive cancer types, enabling patients to avoid toxic chemotherapy and expensive treatments – potentially transforming their lives. Click here for the full list of 2024 winners. Also see the Top 100 highest scoring entries.

Special thanks to our esteemed panel of judges.

Help build a better tomorrow

Since Tech Briefs magazine launched the Create the Future Design contest in 2002 to recognize and reward engineering innovation, over 15,000 design ideas have been submitted by engineers, students, and entrepreneurs in more than 100 countries. Join the innovators who dared to dream big by entering your ideas today.

Read About Past Winners’ Success Stories

Special Report spotlights the eight top entries in 2023 as well as past winners whose ideas are now in the market, making a difference in the world.

Click here to read more

A ‘Create the Future’ Winner Featured on ‘Here’s an Idea’

Spinal cord injury affects 17,000 Americans and 700,000 people worldwide each year. A research team at NeuroPair, Inc. won the Grand Prize in the 2023 Create the Future Design Contest for a revolutionary approach to spinal cord repair. In this Here’s an Idea podcast episode, Dr. Johannes Dapprich, NeuroPair’s CEO and founder, discusses their groundbreaking approach that addresses a critical need in the medical field, offering a fast and minimally invasive solution to a long-standing problem.

Listen now

Thank you from our Sponsors

“At COMSOL, we are very excited to recognize innovators and their important work this year. We are grateful for the opportunity to support the Create the Future Design Contest, which is an excellent platform for designers to showcase their ideas and products in front of a worldwide audience. Best of luck to all participants!”

— Bernt Nilsson, Senior Vice President of Marketing, COMSOL, Inc.

“From our beginnings, Mouser has supported engineers, innovators and students. We are proud of our longstanding support for the Create the Future Design Contest and the many innovations it has inspired.”

— Kevin Hess, Senior Vice President of Marketing, Mouser Electronics

Follow Create the Future

Miniature Surgical Robots

Votes: 0
Views: 6875
Medical

PROBLEM

Surgery is intrinsically invasive and unnatural.  One of more prevalent surgeries that could be improved is colon resection, with more than 380,000 annually in the U.S.  Commonly, a six inch incision provides access to the colon for the surgeon to visualize and manipulate the target area. This is beneficial for the surgeon, as it provides immediate sensory feedback.  Unfortunately for the patient, this technique leads to an extended, painful recovery, large scars, and other potential complications.

Some resections are able to be done through minimally invasive laparoscopic techniques, in which long slender tools are inserted through multiple small incisions.  The number of procedures (<15%) that use laparoscopic techniques is largely limited due to the difficulty.  A better tool would allow more widespread use of laparoscopic techniques, resulting in immediate patient benefits such as reduced hospital stays, reduced cost, and improved cosmetics.  Our robotic surgical device aims to eliminate difficulties associated with laparoscopic techniques while increasing patient benefits.

SOLUTION

The miniature robot is inserted through a single incision at the navel, which makes it less invasive than most current laparoscopic procedures.  These robots represent a paradigm shift in robotic surgery by allowing the robot’s actuators to be entirely contained within the abdominal cavity during the surgery. Due to the software intermediary between the surgeon and the robot, the surgeon need not be in the operating room.  The surgeon operates from a user interface and controls the robot while viewing the procedure on a monitor. The controller has the ability to scale the surgeon movements, reduce hand tremors, and potentially perform autonomous, repetitive tasks such as suturing.  Early testing of this type of robot has shown that they are a practical device that is evolving into a useful surgical tool.

OPPORTUNITY

The only FDA approved surgical robot is the da Vinci Surgical Robotic System (Intuitive Surgical $22B/yr).  Since the da Vinci is the only available robotic option, it has control of the market, but has priced itself out of a large portion of it.  A growing number of patients are accepting the benefits of robotic surgery, and as this acceptance gains traction, a new market for less expensive procedures will emerge.  The proposed alternative represents a decrease in cost passed along to the patient, reducing the per procedure cost from 25k for a current procedure, to 6k for a miniature robot.  These robots are designed such that large portions can be sterilized for repeated usage. This characteristic along with the ability to be injection molded makes the miniature robots a cost effective option.

This type of platform also has room for growth as a tool for other surgical procedures as well as applications in situations such as those for first responders (EMT, fire, and police), soldiers, and astronauts when a trained surgeon may not be immediately accessible.  The portability and relative disposability of a system such as this opens up an entirely new set of applications that have seen restricted use of surgical robots due to their size.

Video

  • Awards

  • 2012 Top 100 Entries

Voting

Voting is closed!

  • ABOUT THE ENTRANT

  • Name:
    Jack Mondry
  • Type of entry:
    team
    Team members:
    Tom Frederick
  • Profession:
    Student
  • Number of times previously entering contest:
    never
  • Jack's favorite design and analysis tools:
    Solidworks, Maple, MATLAB
  • Jack's hobbies and activities:
    Design, Engineering, DIY
  • Jack belongs to these online communities:
    LinkedIn, Facebook, Twitter
  • Jack is inspired by:
    Pain points in daily life that can be alleviated through innovative design and engineering solutions.
  • Software used for this entry:
    Solidworks, MATLAB, Maple
  • Patent status:
    patented