Sustainable Technology
The constant loss of topsoil, ecological degradation, soil collapse, etc. are all effects of soil erosion, which can happen slowly or alarmingly. It is mainly caused due to Agri patterns, Grazing, Logging, and also due to lack of tree roots which firmly holds the soil together.
Deep sea pressures ( minimum 27 bar or 270 m deep ) were utilized to produce fresh ( not salty ) water bu using the existing membrane system .
Cold fusion, combining protons (i.e., hydrogen nuclei or ions at or near room temperature) for usable heat is a promising approach for the future of energy. It can reduce our planet's reliance on fossil fuels, reducing pollution and other environmental issues (e.g., oil spills). However,
Solar energy is the most widely available renewable energy. However, the challenge lies in capturing and converting large amounts of it into a usable form.
Desalinization, or desalination, is the process of removing salts and minerals from saline water to produce water suitable for human consumption or irrigation. There are two main types of modern desalination techniques: thermal (distillation) and membrane technologies. While desalination is more commonly associated with large-scale operations,
Wood has long been a cornerstone material in construction and design, yet traditional subtractive manufacturing methods often result in significant wood waste and elevated production costs. In contrast, additive manufacturing reduces material waste and production costs significantly, as it builds structures layer by layer,
Every once in a while, a revolutionary product comes along that changes everything.
Wildfires have become an increasingly destructive force, wreaking havoc on communities and natural landscapes worldwide. In response to this escalating crisis,
A furnace with a heat exchanger designed to have a pilot light size torch flame on 24 hours a day. The temperature doesn't fluctuate from hot to cold as a regular furnace. The temperature is virtually the same throughout the entire day. It uses less fuel and electricity,
The known vertical-axis Darrieus rotors have a number of advantages over horizontal-axis turbines.
All the heaviest parts (generator, multiplier, brakes) are located below, on the surface of the earth.
There is no need to turn the turbine against the wind.
My project is how to create fully solid–state batteries and accumulators exclusively from natural materials. Glasses and gloves are not needed to make a battery, the technology is completely harmless, simple and cheap. We will do without acids, alkalis and harmful metals, which, like lithium, are sometimes flammable.
Page 8 of 9