Congratulations to Our 2025 Grand Prize and First Place Winners!
Imersiv, a breakthrough technology that improves audio performance by 100X compared to today’s very best audio equipment for applications ranging from sound engineering to space missions to medical imaging, was named the $25,000 grand prize winner at a live finalist round held November 7 in New York. Click here for the full list of winners. Also see the Top 100 highest scoring entries. Special thanks to our esteemed panel of judges.
Help build a better tomorrow
Since Tech Briefs magazine launched the Create the Future Design contest in 2002 to recognize and reward engineering innovation, over 16,000 design ideas have been submitted by engineers, students, and entrepreneurs in more than 100 countries. Join the innovators who dared to dream big by entering your ideas in our 2026 contest opening March 1.
Read About All the 2024 Winning Inventions
Special Report spotlights the eight amazing winners in 2024 as well as honorable mentions in each category, plus the top ten most popular entries as voted by our community.
Click here to read moreA ‘Create the Future’ Winner Featured on ‘Here’s an Idea’
Spinal cord injury affects 17,000 Americans and 700,000 people worldwide each year. A research team at NeuroPair, Inc. won the Grand Prize in the 2023 Create the Future Design Contest for a revolutionary approach to spinal cord repair. In this Here’s an Idea podcast episode, Dr. Johannes Dapprich, NeuroPair’s CEO and founder, discusses their groundbreaking approach that addresses a critical need in the medical field, offering a fast and minimally invasive solution to a long-standing problem.
Listen nowThank you from our Sponsors
“At COMSOL, we are very excited to recognize innovators and their important work this year. We are grateful for the opportunity to support the Create the Future Design Contest, which is an excellent platform for designers to showcase their ideas and products in front of a worldwide audience. Best of luck to all participants!”
— Bernt Nilsson, Senior Vice President of Marketing, COMSOL, Inc.
“From our beginnings, Mouser has supported engineers, innovators and students. We are proud of our longstanding support for the Create the Future Design Contest and the many innovations it has inspired.”
— Kevin Hess, Senior Vice President of Marketing, Mouser Electronics
contest
Contest
PRODUCT NAME: SUSTAINABLE [IoT based wireless] [AUTO] BODY-SCANNING-GLOVE MACHINES FOR PATIENTS
Tagline: instant ultra-body scanners for life
HOW THE PRODUCT WORKS:
Simply switch [on] the power-button, then the auto-screen shows up/ displays settings,
auto-scanning- features/values: eg normal-scan,intensified-scan,
It’s Protect Front bumper of damage due to pavement by mobile via Bluetooth alarm system control as a (Sticker will be stick it in the Front Bumper) with connected mobile via Bluetooth.
The advantages (Targeted Users):
Protection Front bumper by only stick a Sticker Bluetooth transmitter Device in the front bumper side for vehicle - No drilling, wiring,
I personally have to use a wheelchair to get around. While that is fine in and around the apartment I live in but can become very arduous when traveling 8 or 10 blocks or more. Note that I am 69 years old. Unfortunately electric wheelchairs are very expensive (over $10K) which got me thinking on a solution.
Water crashes are the drone pilot’s worst nightmare. Drones have a considerable amount of electrical components that need to be cool to operate correctly, hence air cooling vents are located on the surfaces of the drone. If a drone crashes in water, it sinks rapidly and if it is not found and retrieved quickly,
I have a portable, permanent, dome house construction project. That can withstand 150-mile winds and microbursts.
I just went through the mega storm of Canada Quebec winter weather. I though the house was going to buckle under the wind. Huge trees uprooted and major power outages for days.
The picture is just a taken image from the internet.
My primary goal is to produce a single presentation model that examplifies this transport system by searching partners who have the first comment: It is a fiction. Yes, exactly it is but a question arises: which technology is attainable to create this concept truck? Hard fact, a new system is inevitable.
Hello, I thought of proposing such a dream camera idea. The helmet camera with glasses can be made of silicone or sponge on the inside. It has a skeleton that is made up of scanners that form a system connected to each other and scan the neurons during sleep.
A feasibility study needs to be started now. The technology exists to build a worldwide electrical grid now. The power would be transmitted with direct current to minimize losses from converting DC to AC.
Direct current is now transmitted many miles on land and in the sea.
Is it a bird? Is it a plane? No, it’s a drone. Introducing the Bird Bot, a new UAV designed to soar like a real-life pigeon using bird-like feathered wings.
The Bird Bot prototype is called a bio-hybrid aerial robot because it fuses both biological and artificial elements. To put working prototype together,
We are developing a new generation of solid fuel combined heat and power microturbine system. Fuels include woodchips, waste plastics, waste biomass, fuel pellets, agricultural waste, and any combustible solid, as well as conventional fuels such as propane, natural gas, heating oil, waste oil, vegetable oil, etc.
Page 123 of 1029
