2010
Entries
An apparatus and method for capturing 3 dimensional tomographically registered full spectrum computer digitized images of internal structures of specimens is described. Instrument Collected 2D data slices are later processed to create extremely intricate 3D models in full color.
Cars of the 21st century are emitting less and less pollution.Despite this, fossil fuel burning is still necessary to power the car and thus emit pollution.With the technology that we have today, it is impossible to have 0 emissions while burning fossil fuels.But alternatively, with the Fully Internal Combustion System (FICS),
Alternative fuels are gaining more and more importance due to increasing oil prices, and environmental concerns. Producing and using renewable transportation fuels is one approach for sustainable energy future for the world. A renewable fuel not only contributes lesser global climate change but also they have potential to preserve the agricultural activities.
Why struggle through the air when it can be swept out of your way in front of your vehicle? If you have ever driven in the slip stream of a truck you will know you don't need to be so heavy on the gas. About half the propulsion energy of a car is lost in air resistance.
Galvanochemical process can be used for water treatment and decontamination, as well as for production of a vast rage of chemicals and compounds, such as oxides, hydroxides, salts, etc.
One of the driving forces in the galvanochemical process are ferrous and ferric ions, because they are responsible for transforming chromium ions (6+) to (3+),
Existing composters for private garden application have the drawback, that after having filled in the organic material the most valuable ready compost is located in the inner center of the composter and can only be extracted by taking away all the outer material. This requires a lot of work and additional space for depostiting the non-composted material.
This is spur gear involute calculator.
Most of the spur gears are made up from gear hobbing technique.
With the development of technology nowadays gears are made from CNC (Computerised Numerical Controlled) machining.
GEDAYC is a new concept of wind turbines with blades and Comets 50% more efficient than propeller models.
Thanks to its design and the wide range of wind that generates energy from weak tovery strong winds.
The idea is to create a logistics company that manages the design,
Now a days we have the problem of energy wastage alot.
That is why it is needed to increase the efficiency of energy.
In cars we have, especially electric or solar car, it runs with the electricity. It has some particular range to have kms. Then after we need to drive it, we need to charge it again.
This geothermal water heater design consists of two water tanks connected together with a water-to-water heat pump to extract heat from (or cool) the water in one tank to heat the water in the other.
Page 25 of 72