2022
Aerospace & Defense
The maturity of the technologies for the guidance and control of RPAS allows for innovative operational options such as the ability to spray (a liquid) a significant amount of an agent of any sort at a pre-established point in the atmosphere.
This is the case of NitroFirex,
When it comes to taking cargo into space the current method is to take the cargo, put it on the top of a large rocket and launch it. Launching a rocket is expensive, tens of million of dollars.
The concept of momentum plays an important role in the theory of mechanics. Forces are broadly classified into contact forces and Action at a distance. To understand momentum a simple experiment will suffice.
Most aircraft composite repair has to be done in a controlled environment .Therefore the damaged parts need to be removed and sent to a shop to perform the proper repair.
A feature of the drone is that it includes the properties of aircraft and helicopter types of UAVs. It is equipped with two beams on which 4 lift motors are mounted, designed for vertical takeoff and landing from almost any surface. A pulling engine is installed in the bow,
Wildfires are very challenging for climate change and natural ecosystem. Many factors affect how a wildfire burns and how difficult it may be to control. The three sides of the fire behavior triangle are weather, topography and fuels. To put out a fire, heat,
This is an unmanned aerial vehicle (AUV) that was inspired by the drone Alta 8. There are two cameras, one for an aerial view and another for ground.
Flight delays and cancellations due to weather, cost commercial aviation dearly. Landing is the most safety critical part of flight. Landing in low visibility conditions, characterized as Cat II & III in aviation terminology, requires a very elaborate set of facilities and lots of real estate.
Using a new FAST LiDAR system with no moving parts, the first of its kind, very fast moving debris can be tracked, identified by material composition, and eventually mitigated by robotics systems employing magnetics and forceps. The complete system will integrate with current technology available in use.
It's very hard to remove aircraft sealant by using the traditionally method especially those old baked sealants and in very limited spaces. Therefore I developed a lightweight and slim sealant scraper that operates very differently than those presently in use.
Page 4 of 7