Aerospace & Defense
My startup BUTTERFLY LLC will initially design and manufacture UAV/Drones for Harvesting. The Focus will be Remote Controlled and Unmanned Aerial Agricultural Technologies.
In the future, the company will expand its products by design and manufacturing of Spacecraft, Aircraft and Space Exploration Technologies.
For my startup’s agricultural harvesting UAV,
Aerodynamic Design of Flow Analyzer with 9 Probe and 45 Pressure Taping Approach for Subsonic to Supersonic Flow
In general, prototype models of aerospace vehicle, aircraft or high speed wing bodies (even in automobiles), objects are tested in a wind tunnel test facility to get theoretical data to design the object at optimum solutions.
This system works by disrupting the surface tension of water that 1, forms a wedge under a tire due to a combination of velocity and water depth on the road/runway surface (Dynamic Hydroplaning) and 2, aerosolizing the thin layer of water on oil film that forms on paved
Before reading the theory know that I am basing it on three facts and assumptions listed below.
In space where there is microgravity, heavy objects move around easily. For example, astronauts can move equipment weighing hundreds of pounds with their fingertips.
Autonomous laser spacecraft for the purpose of redirecting asteroid trajectory.
A 300 KWH laser heating the rock face of the asteroid target produces about 400 tons per second of thrust. Deep space interception of the asteroid provides enough time to shift the trajectory into a solar intercept course.
Did you know that every plane is equipped with a so called fuel tank inerting system that is used to suppress the oxygen concentration at low level to prevent an unexpected explosion accident? Yes, every airplane has all that to secure the aviation traffic safety,
Page 1 of 7