2023
Entries
OSIP is a modular test/measurement instrument that has full galvanic isolation, an embedded computer, a high power PSU within a 3U rack mount Eurorack chassis while being flexible and having room for improvements to be done by the end-user.
Packet Protector is an Arduino Embedded device that runs an IDS program that monitors the incoming network traffic on the Ethernet interface. The program implements a variety of protocols and mechanisms to analyze the traffic and detect potential threats.
ParCli (PARrot CLImbing robot) is the world's first parrot-inspired climbing robot developed by Clyde Webster at the University of Technology Sydney. ParCli is unique in that, like a parrot, is uses three-limbs for locomotion, with the center-limb being larger, stronger, and having more dexterity,
The frequency of droughts has increased by nearly a third globally since 2000. A UN report states that 75% of the world could face drought by 2050, and 5.7 billion people could live in areas with water shortages for a month or more every year.
TriboDyn® GREASES are patented ceramic lubricants engineered to form a lubricating ceramic film under extreme heat & pressure conditions. TriboDyn Greases perform under extreme temperatures & extreme pressure while reducing operating temperatures, fiction & wear.
TriboDyn® TRI-EX2 Motor Oils are a patented ceramic lubricant that is attracted to areas of heat & friction. As pressures increase with RPM or load, the special TRI-EX2 lubricants, combined with the active “Ceramic Coating Technology” in the oil,
Background:
Though not 'sexy,' all machinery perform more efficiently with lower costs using transmissions/gears. Our revolutionary FrictionLess Gears© [FLG] and High-Torque Infinitely-Variabe Transmission [HT-IVT] technology best solve shortcomings in previous inventions without use of conventional spur gears.
IMHO, the following will be the most impactful tech in the near future - the Sub-Quantum Scope [SQS].
It is a simple, compact, world-record resolving power microscope technology that, in it's crude prototype iteration,
PCB debugging can be tricky. For example, if we want to use an oscilloscope to measure signals of interest in the PCB, we need to locate them in the schematic and select the appropriate pad for each signal on the PCB layout to put the oscilloscope probes.
Page 26 of 41