2023
Sustainable Technology
The quest for manufacturing green hydrogen fuel has gained increased urgency. Currently, the primary method of producing green hydrogen is electrolysis of water. As a water source, seawater offers many advantages over fresh-water, including its electrical conductivity much higher than that of fresh-water. Moreover, unlike fresh-water being considerably limited,
Technical Abstract
The Solaris system is a novel, sustainable technology designed to address the global challenge of providing clean drinking water to underserved populations while reducing dependence on non-renewable energy resources. The system harnesses solar energy to generate hydrogen peroxide (H2O2), a powerful oxidizing agent, which is then used for water purification. Solaris is cost-effective,
I have a portable, permanent, dome house construction project. That can withstand 150-mile winds and microbursts.
I just went through the mega storm of Canada Quebec winter weather. I though the house was going to buckle under the wind. Huge trees uprooted and major power outages for days.
The picture is just a taken image from the internet.
There are numerous sources’ of salt water and very limited of fresh water in the world. A lot of different distillers work everywhere but most of them are very expensive and require a lot of energy. We suggest a very cheap distiller with very low consumption of energy. It is cheap because: using very simple technology;
Ionic Mineral Technologies (Ionic MT) has developed Ionisil™, a nano-silicon anode drop-in technology for lithium-ion batteries. The product is designed to replace graphite (the current mainstream anode material) in the anode of the battery, both partially and completely, to significantly boost energy density and therefore the range of the battery.
We designed high power DC modules intended to help electric vehicles (EV) charger manufacturers to expand their product line to fast chargers reaching hundreds of kilowatts to megawatts.
Our HIPO™ module design provides superior performance in fast-charging applications with multiple interface options to energy storage and renewable energy sources. It is compact and energy efficient.
We are developing a new generation of solid fuel combined heat and power microturbine system. Fuels include woodchips, waste plastics, waste biomass, fuel pellets, agricultural waste, and any combustible solid, as well as conventional fuels such as propane, natural gas, heating oil, waste oil, vegetable oil, etc.
A new wind turbine rotor featuring greater wind transparency and simplified blade shapes. Such forms make it possible to arrange the production of blades of large wind turbines without the use of manual labor. Usually, due to the complex profile of the blades, which have a variable width and twist along the blade,
The risk of whale entanglements (worldwide) would be greatly reduced if trap fisheries (commonly used for catching crab, lobster and octopus) used ropeless fishing techniques which remove the need for floating ropes between the water surface and ocean floor.
In South African waters,
The project will allow converting thermal energy into mechanical energy and then using mechanical energy to convert it into electrical energy. Heat can be obtained from geothermal sources, direct solar heating, wind or any other source.
Page 3 of 11