2021
Manufacturing/Robotics/Automation
PROBLEM:
It is estimated that around 50% of electronic and electric waste is dumped in offices, homes, public entities or warehouses, more than 40% is buried or discarded in garbage dumps and landfills and about 10% enters informal or formal waste management schemes. This represents a waste of resources that could be recovered such as gold, copper, aluminum,
Far in the depths of Earth’s oceans, a vary diversity of life call the abyss home. Often times life below can be more alien to us on the surface than the ones we imagine amongst the cosmos, but nonetheless these deep dwellers have adapted to survive and thrive in their home environment. To better explore and understand the deep,
The "RoboGuts™ S.T.E.A.M. Education Program" is designed to help people all ages begin to learn the whole manufacturing process by teaching basic process control systems learning to;
Control various electronic devices,
The main problem faced by homes that do not have a good foundation is typhoons or hurricanes having a great deal of wind force.
Microfibers are produced with a combination of polyester and polyamide at most common ratio of 80:20 respectively. The polyester attracts dirt and oils while the polyamide gives the structure of the fiber strand and water absorbing capability. Viewed under a microscope, the microfiber cross section looks like a star with 8 polyesters and 1 polyamide.
Organizational Resource Trading (ORT)
{To save time and material}
The biggest challenge in any organization is inventory management. Either there is too much inventory on hand or they are in need of it.
Manufacturing being the main pillar of civilized societies, plays an in important role in establishing a sustainable way ahead. In Pakistan, almost all manufacturing models are founded on an timeworn standard in comparison to the advance world. It is true that the culture and economy affects the technology, tools and related options to build sustainable solutions. However,
The innovation solves the problem of massive demolition, earthmoving, and drilling without using explosives or explosive propellants. The innovation utilizes a linear motor device and projectile (such as a railgun) to create tunnels and shafts, break rock, and move soil. The firing solution is an input of geotechnical engineering data, and the design location/length of penetration.
Page 4 of 4