2015
Entries
This entry follows a similar one from my participation to the First Edition of CreateTheFutureContest.
The original concept of safety of travellers is the driver but the implementation is different.
BASIC CONCEPT
The basic concept is to identify trains,
It is proposed a freight vehicle able to travel on the railway and the tramway.
LayOut:
1 Master tram-train all deck, with two flights of ends.
There are human presence on board (driver,
Although counter-intuitive, evolutionary internal combustion engine concepts are often times preferred over revolutionary ones. Although intriguing theoretical engine designs abound, a truly revolutionary engine concept’s value is questionable if it can’t be produced in quantity, inexpensively, and also provide reliable service. On the other hand,
Problem Statement
Today most of the transportation systems are based on non-renewable energy resources and also calls global warning, air pollution, noise pollution in addition requires a specific path to travel. The most of power wastes into to overcome the frictional force, drag force etc.
This project started as a final thesis on aerospace engineering bachelor's degree. The objective was to create something that could be built with current technologies and promoted and motivated further development on electric vehicles.
Trasgo can achieve the same speed and manoeuvres as any internal combustion aerobatic aircraft.
“One of the greatest challenges of the past half century for aerodynamics engineers has been how to increase the top speeds of aircraft that take off and land vertically without compromising the aircraft's lift to power in hover or its efficiency during long-range flight.”
The Triple Fuselage Flying Wing concept takes the idea of an aircraft built in the shape of one large wing to a new level. The idea of the triple fuselage is using multiple, in this case three, standard tube fuselages and building a flying wing body structure surrounding them.
A FRESH IDEA
The current method of extraction of material from a flexible tube (be it toothpaste, cosmetic products, food products, etc.) is to apply pressure to the flexible tube so at to push the material towards the opening in the tube.
Most of the time whenever any tube comes to end we generally use any heavy object to squeeze out the remaining and no doubt the process of it is very lengthy and sometimes difficult in various circumstances.
A spacial expander created for excessive midrange tones at high volumes coming from amplified speakers in the 10" to 12" diameter. Speakers who's harsh tones emit a deafening directional sound can now be tamed easily without alteration of the actual speaker's tone.
Page 80 of 88