2022
Manufacturing/Robotics/Automation
A means of achieving nearly zero coefficient of friction
The sliding surfaces are each coated with a reactive material, in nano capsules or in some cases merely absorbed in a microporous surface. The reactive materials may range from hydrogen producing couples such as Lithium Hydride and Water or Carbon Dioxide producing couples such as Sodium Carbonate and Acetic Acid.

Founded in 2018, the company has created a new way of building composite parts, one that combines 3D printing technique and filament with continuous carbon fiber reinforcement and compression molding to create strong, light components. The multi-step method delivers parts that can be both cheaper and less wasteful than either conventional composite or machined parts,
My innovation design for the future is a robotic watering and sower machine. It can operate with renewable energy using solar panel systems, wind turbine, self irrigating system, and composting as fertilizer. Its main purpose is watering and sowing for less strenuous work and for drought control. This can save money and labor cost.
It's a robotic startup that builds demotic robot with resealable price to be owned by any consumer. We focus on housekeeping robots with many features to add fun and adventure to the ordinary routine work, helping to reduce time and effort.
Simone is an opensource fembot (female) humanoid AI robot and is part of the #openFembot project. The purpose was to design a humanoid robot with A.I. that anyone could build. Simone phase 1 was completed in January 2022.
Uses: Simone can be used for entertainment, a store greeter, an office receptionist, a robot singer, a robot actress (“actroid”),
It's all about renting a car in a smarter way. This idea surfaced due to the problem we faced during our vacation. We leveraging the concept of connected vehicles for our idea, connected vehicle is currently in the market where , the car will have a modem and its connecting to cloud,


Increasing pest and disease pressures urge specialty crop farmers to spray orchards more frequently than ever before to grow marketable products. In the order from primitive to sophisticated, current technologies in industry allow orchard farmers to spray trees in three different ways: conventional air-blast sprayers which are the most common,
Innovation:
I have designed and built a prototype replaceable vise jaws for use as a combined parallel and angle setting device. There are recently produced products that operate similarly, however, they use compressed air to "activate" the pins and all but the needed ones must be retracted. This has to occur every time the vise is opened and closed.

Page 3 of 4