2017
Entries
As per a report published by the National Cyclone Risk Mitigation Project (NCRMP), India is extremely susceptible to natural hazards especially earthquakes, floods, droughts, cyclones and landsides. Power outages, one of the critical downfalls of such calamities, has plagued India for decades. In 2012, half of India’s total population experienced power outages as an effect of severe drought.
Petrol usage can be minimized by operating the flywheel upto certain speed by DC series motor and latter by petrol. It provides speed and have lower fuel consumption.
Petrol can be available only for 64 years. The alternate source for petrol is Liquified Petroleum Gas.
Jaipur, a metropolitan city out of so many in India, has seen a growth of around 125,000 IC Engine Vehicles in past 5 years. As India witnesses Electric Vehicles taking over in 10 years down the lane. The problem of fate of these ever increasing ICEVs is what our idea focuses upon.
This technology is a device that uses electrical activity to facilitate the wound healing process while protecting the wound. The bandage is made of an electroactive material (pictured above) that is stimulated by the heat of the body and the pressure of cell growth, thus no external power source is required.
Vehicle is mounted/hanging on the elevated pipe or rail track with the help of height adjustment and shock absorber link. The wheel on rail track has the power from internal drive and can rotate freely by actuating the clutch.
In a conventional Reciprocating Compressor there are a number of moving parts like the crank, connecting rod, belt drive system, and electric motor which contribute in frictional (mechanical) losses resulting in low efficiency. Also it is bulky in size and high maintenance required as it consists of motor, belt drive system, rotating parts.
It is based on the principle of working of perendev motor, which was deemed impossible because it was a perpetual motion machine and no further development of that motor was continued. Here I am reusing that principle but with certain major changes to it. I have replaced the permanent magnets in the motor using electromagnets,
The VASMAG transport system uses the principle of electromagnetic repulsion, in which the rail is constructed with non-magnetic conductive materials, (aluminum or copper), so that large superconducting magnets can be used, naturally more power is required to energize them, but can allow a greater inter-iron with a simpler control than in the previous process,
HOW ECW WORKS:
ECW functions like an elephant trunk, but, instead of a nostril, a cows tongue type device, or, mini car wash.
ECW, arm movement, functions via well know technology, such as 3D printing and robotics, guided by color and by auto exterior CAD details ~
Page 25 of 85