2023
Automotive/Transportation
My primary goal is to produce a single presentation model that examplifies this transport system by searching partners who have the first comment: It is a fiction. Yes, exactly it is but a question arises: which technology is attainable to create this concept truck? Hard fact, a new system is inevitable.
TriboDyn® TRI-EX2 Motor Oils are a patented ceramic lubricant that is attracted to areas of heat & friction. As pressures increase with RPM or load, the special TRI-EX2 lubricants, combined with the active “Ceramic Coating Technology” in the oil, form a self-lubricating “Ceramic Film” in high load & heat areas,
This proposal is about rethinking how we transport people and goods in the future.
The idea, herein called RailCat, is a modular rail-based system that allows a non-stop smooth transportation flow between any departure and destination locations within the system.
The RailCat concept is an alternative to the historic race for faster transport between centralized hubs.
Railroads are a massively important part of a transportation system. But, while very efficient, the huge loads they carry on a vast and aging infrastructure can cause incredibly costly accidents, in loss of life and monetary terms. Train accidents appear to have increased by 25% in the last decade. Horribly obvious examples include the East Palestine, Ohio,
Using (Cold War ending Star Wars Strategic Defense Initiative technologies) research of: 1)superconductivity at room temperature, 2)Cold Welding, 3)nanograin metals, 4)high speed electroplating, 5)magnetic conducting insulation, 6)magnetic levitation bearing, and 7) direct drive; I propose to create with a national laboratory design group’s assistance layout, simulate, &
The purpose of this presentation is to create that missing conscience to be prepared to help each other in natural or man-made disasters
Just a few months ago more than 50,000 (fifty thousand people) were taken out by an earthquake in Syria.
Since the introduction of water cooling to offroad performance motorcycles in 1981 [1], the most integral part of engine thermal management has remained unchanged. The traditional design of radiators uses winding louvers to exchange heat with the surrounding air in repeated zigzagging patterns (shown in Figure 1).
Carapace suit for motorcycle riders to minimize damage to their body in case of accident
The number of fatalities involving motorcycle riders is untenable.
The motorcycle helmet provides some protection but is insufficient to reduce the damage to the rest of the body.
Motorcycles have been one of the major modes of transport in everyday life. Nearly 74.8 percent of vehicle users depend on two-wheelers. Motorcyclists are more vulnerable on the road and are more likely to get injured or killed compared to other modes of transport. With the increasing levels of technology, comforts,
Phenolic resins as base materials for automotive friction materials manufacturing shall be replaced by inorganic binders. Due to a casting process in manufacturing versus todays pressing process this will allow significant energy reductions, up to 80% compared to the standard process in manufacturing processes today. It will allow the partical emission during braking (WLTP) to be reduced by 50%,
Page 7 of 8