2023
Manufacturing & Materials
Time's up! We are in the "tipping point."
So, we're commercializing a piece of NASA R&D for generating cleansing aerosols. These naturally occurring aerosols are what moderate the levels of GHGs in our atmosphere.
Through a recent NSF Convergence Fellowship, I began modeling distribution sites for carrying the aerosols into the atmosphere and have parameters for deployment.
Dow SI-LINK™ DFDF-5451 NT Faster Curing Ethylene-Silane Copolymer is a patent-pending advanced polymer with an entirely new molecular architecture for making electrical cables with unmatched performance and sustainability.
Perhaps you or someone you know uses a cart, a dolly, a hand truck. Do you find yourself having to having to buy and keep all three units available for daily work or as needed?
A large amount of plastic is used in day-to-day life but near to half is recycled. Recycled plastic goes through many processes until it becomes pellets for sale which are used for plastic molding and making new products. Two different techniques are used to one product from waste plastic.
A Non-Metallic Far-Infrared (FIR) and IR (infrared) Thermoplastic (eg PTFE) DX Fluid Heater/Boiler and Heat Exchanger and Method is disclosed. No direct contact of heat source (electric IR emitters) with heated fluid media; no heating of IR-transparent (low reflectivity) exchanger surfaces in contact with fluids;
Geopolymer term was given by Dr Joseph Davidovits from France in 1978 and created Geopolymer Institute. Geopolymers are a class of totally inorganic, alumino-silicate based ceramics that are charge balanced by group I oxides. These are rigid gels made at lower temperature and pressure into near-net dimension bodies mostly though Vibro-casting or ramming process.
Providing vivid graphics to gripping surfaces.
Slip resistance is required in many applications. Slip resistant materials are usually a textured surface, and made from a hard, abrasive material such as sandpaper, or a softer elastomeric material. In order to be slip resistant, these materials need a texture to improve grip. Unfortunately, a texture prevents or distorts any graphic application.
At present, cotton processing factories are mainly equipped with DP-130, ZKHDD, KDD, 4DP-130, DP-130 saw gins that separate the fiber from the seed using saw blades. They are very noisy and vibrate strongly, as a result, only 30% of the fiber is removed from the saw teeth,
ABOUT US:
We are a young team of aerospace engineers and 3D printing enthusiasts incubated at the lush green campus of National Institute of Technology Karnataka (NITK) Surathkal.
OUR VISION:
Aakruthi 3D aims to be India’s own tech giant by developing and commercializing Indigenous technologies.
How DSG technology, combined with direct fuel injection, can increase repair time technology to be used in the military sector, as high fuel pressure by hostile nations and cultural ideological bias to the West, or foment arms race.
Yellow axis of the attached photo requested in wind turbines of superpowers or powers with military technology.
Page 3 of 4