2012
Entries
I have devised an Electroscope/ESD Device that detects valent electrons, and then "drains" the user of any differential voltage. This device should be used when working on electronics, in effect to show the user of any electric fields that might exist, along with eliminating the static charge.
Rockets utilized by NASA, etc. utilize an antiquated ignitiion system, requiring a chain of events to occur to obtain ignition. (Safe-and-Arm device to rotate to "arm," electric impulse given, ignites propellant pellets, which ignite initiator propellant grain, which ignites the igniter propellant grain,
Elpipes are polymer-insulated underground HVDC conductors based on low cost extruded metal conductors. Elpipes are designed for higher efficiency than is practical for overhead power lines. For a 325-800kV DC elpipe, we have selected a design basis of 1% loss per 1000 km,
High temperature and high mechanical stress harsh environments can cause wear and erosion on exposed surfaces of critical components. Few sensing devices or methods are capable of performing intrinsic wear measurements, particularly in real-time and in situ.
If people are in a place without possibility to recharge mobile phone battery, this mechanical charger can help. The charger is built into a pencil. It consists of linear alternator, rectifier, capacitor, constant current source and LED. It can be used as pocked lamp if LED is switched on.
eMoTria is a lightweight electric vehicle, specially designed for sustainable mobility in cities and appropriate for a multitude of services. A crossover combining a microcarrier (lightweight quad) and a maxi-scooter, it can be driven without a license.
Low-cost, high efficient, precision electro-mechanical device. Proceeds amount and direction of mechanical movement into electric impulses with high resolution.
For providing synchronous movement on technological lines, transporters, labeling equipment, for printing on moving objects.
The cooking pots that we use now have flat bottoms. These pots absorb certain amount of heat energy from the heat source from the bottom. This heat in turn is conducted to the water in the pot. This takes a certain amount of time to boil the water.
It appears that the medical products presently available to patients lack a critical energy source.
This is very true for Insulin Pump wearers. If the batteries should go bad, there is no backup available until the user can get new ones.
Fastener pieces are supporting a load and vibration that it make ideal to use piezoelectric material for an energy harvester. The forces can be compression or tension, many times both in the same element. It can be use to maximize the electric output.
The simplest element is the washer.
Page 20 of 74