2014
Entries
Our work describes the design, fabrication and flight testing of an RC aircraft (for surveillance) powered with an Electric Ducted Fan (EDF). The configuration and layout of the aircraft was inspired by MiG-29 and F-35B; hence it has a swept high wing, aft horizontal tail and twin vertical tail configuration.
The main objective of this project is to determine the characteristics of accidents involving vehicle submersion and to overcome these characters to save the human life.
This can be made possible by designing a vehicle along with a hull beneath it, in such a way, that it overcomes the upright buoyancy force and prevents the vehicle from submersion.
Summary of the project:
This project is initiated to facilitate the physically challenged persons by both hands and legs. They can ride this vehicle and earn money which will be helpful for their survival. The vehicle is a three wheeler because three wheeler requires less effort for steering when compared to four wheeler.
The aim of this thesis was to develop a test setup that determines tensile strength of additive manufactured plastic parts under varying climatic conditions. The test setup had to be integrated into a climate chamber with limited dimensions.
Fuel cells are the future power sources of automobiles and other electrical appliances. In manufacturing of fuel cell platinum coating is an important process to achieve high efficiency in performance of the fuel cell. This coating process is key in achieving efficient output from fuel cell.
It works on rainfall rate. When the rainfall is more then the wiper actuates very quickly. When the rainfall is slow it means the wiper moves slowly. According to intensity of rainfall the wiper works. it consists of sensors, actuators and cup and wiper mechanism .
In general, lower limb disabled people do their daily activities on wheelchairs. The disabled people encounter difficulties when they have to ascend or descend the stairs. For example:
• enter or exit buildings that have no ramps,
• go up or down in buildings that have no elevators or
• cross pedestrian bridges.
Therefore,
The accuracy of multi dimensional simulation of vehicle dynamics has been significantly increased for both passive and active vehicles which are equipped with advanced electronic components. Recently, one of the subjects that has been considered is increasing the car safety in design. Therefore, many efforts have been made to increase vehicle stability especially during the turn.
It is estimated that about 10% of the population suffer from bruxism. This disease is a movement disorder of masticatory system that results in involuntary grinding of the teeth and the clenching of the jaw during sleep as well as wakefulness. Tooth clenching or grinding during sleep can result in abnormal wear patterns of the occlusal surface,
Problem:- We all know that the electric vehicles are more efficient than the oil burning vehicles. They make less noise and are pollution free. But electric vehicles are not frequently used in day to day life.
Reasons:
1. One cannot use electric vehicles on the go. He/she has to stop for some time to charge the batter .
Page 19 of 82