2018
Electronics/Sensors/IoT

Brief description of solution:
Safety Electronic Protection Glasses (eyes protection) only worn to order another device wirelessly when operating dangerous cutter & drilling devices (like cutter and trimmer trees devices or a welder or holder devices) to protect the worker otherwise the dangerous device will not work.

Benefit for the user:
• Force users of devices dangerous or acute to wear Safety Protection glasses to preservation and safety of their Eyes (compulsory)
• Will increase the degree of security and safety and security will be electronically controlled process which will lead to increase the security of quality and safety of individuals

Target groups:
• The worker users a (dangerous consequences) like (cut and trimmed trees device or a ...

If we fix a source of radiation at the end of a lever rod with a magnifying glass in front of it such that the rod is long enough to magnify the minute unidirectional force and capable of rotation about an axis at the other end and hold that axis perfectly vertical by hand with the long axis of the lever rod perfectly parallel to the horizontal, the bar exhibits unidirectional motion not explained by ideomotor effect and the direction of motion can be predetermined by control and double blind study.The motion of the lever rod then rotates an electric generator fixed to the axis and the difference of electricity produced can be measured by a scale. More is ...

Light-emitting diodes (LED), like any semiconductor, emit heat during their operation. This is because a significant portion of electrical energy (75% – 85%) is converted to thermal energy which results in an increase in the temperature of the LED. Thermally stressed LEDs lose efficiency and their valuable technical parameters. If nothing is done to control the increasing temperature of the LED, the PN junction may fail, possibly resulting in thermal runaway and catastrophic failure.

Thermal management of LED lighting fixtures (or LED lamp) involves the transfer of thermal energy from printed circuit board (PCB) on which LEDs are mounted. This can generally be accomplished through the use of heat sink, which dissipates heat just by means of natural thermo ...

Commercial nanoelectronics device manufacturing is very expensive, with fabrication facilities costing up to 17 billions and requiring massive quantities of water and power. The cost of the next fabrication in Taiwan is projected to reach $20 billion. Meanwhile, the Internet of Things (IoT) where a network of physical objects embedded with sensors, electronics, software and connectivity has an estimated market of $11 trillion over the next few years. These IoT market projections will be significantly accelerated by the availability of ubiquitous low cost sensors which will be difficult considering the current cost of fabrication.

This new disruptive technology will enable the printing of nanoelectronics at the same scale but at a facility that will cost 100 times less than ...

Objective of our project is to deliver a computer vision and artificial intelligence based solution which will automatically detect the disease in apples using Azure machine learning for building data models. The quality and yield of fruits can be degraded too much in the presence of the diseases in the fruit. Manual distinguishing proof of infected fruits is tedious. The utilization of image processing procedures is of outstanding implication for the analysis of agro based applications.
No such system exist in the market that can help people and agriculture industry to automatically detect disease infected apples.

Through IDE called ML studio, we can build data models through drag-and-drop gestures and simple data flow diagrams. This not only minimizes coding, ...

In this project, load cell is used as a weight sensor. This sensor will be placed below the LPG gas cylinder. GSM module is to send SMS to owner as to inform about weight and leakage of cylinder and to gas agency for booking of the cylinder.

This project is used to monitor continuous weight of the LPG cylinder and detect the leakage. If any gas leakage occur, the regulator automatically switches off . When the gas cylinder gets emptied, this system book the cylinder automatically and informs the gas booking to the ...

Cycling has undergone a digital revolution. Over the last 15 years our bikes have gone from having simple cyclocomputers to basically having an onboard computer. Heart rate, power measurement, GPS, gradient, temperature, it’s all there. But what about the biggest factor of them all? The one that can give you more speed in one day than 6 solid months with a power meter and a top-notch coach?

That’s the question we kicked around at the start of what we now call BodyRocket. What would it take to actually measure a rider’s aerodynamic drag?

In a wind tunnel the drag measurements are taken by placing a force gauge between your bike and the floor, measuring the full drag on bike ...

Light Communication is a new wireless communication technology, where data is communicated in the form of light. It has benefits of interference-free communication, increased bandwidth & data rate and license-free operation. LED/LASER is used as light data transmitter and photodiode/phototransistor is used as light data receiver. CMOS sensor in camera can be considered as an array of phototransistors which collects focused incident light and converts it into an image on the sensor. In a similar manner, CMOS sensor can be used to capture light data and function as a light data receiver. The same focussing mechanism when used in reverse order functions as a diverging mechanism. LED array placed in this diverging plane will produce a diverged light data ...

Today, cellphone has two cameras. Front camera and back camera. Front camera usually used to take self photo and video call. Back camera used to take far object like people or buildings. The front camera and back camera are basically same things. They convert visible lights to electrical signals. So, why we should use two cameras in a single cellphone that the difference is only the direction that photo taken? Using single camera that can be directed to back or front can reduces the production cost. It's only use a single image sensor. So whether it comes from back or front, it will shot in the same resolution and other quality parameters.

I use mirror M to direct the ...

Flexible OLEDs present designers with a practically unlimited tool for creating new OLED-based luminous objects. In order to inspire lighting designers or product engineers and to explain the basic design options for OLED elements for creating own unique OLED-based lighting designs, we launched Project Monarch, an OLED Design Kit. It highlights in a non-technical way the exceptional properties and features of OLEDs, such as their flexibility, transparency, the segmentation of the luminous area, and the opportunity to realize multicolored surfaces and patterns characterized by variable color, saturation, and tint – all in a single OLED design in the shape of a butterfly.

We focus on small-molecule OLED systems that are manufactured in a clean room using vacuum deposition tools, ...

Page 1 of 7