2018
Entries
This technical solution is a magnetic suspension device consisting of an inner ring and two outer rings adjacent to each other and enclosed in a single body. In the inner ring there are permanent magnet inserts placed on both of its sides and located towards the permanent magnet inserts of the two outer rings with analogous poles. (Figure 1).
MANTARAYA PROJECT
Free diving for All
By Jean-Pierre GALLO Engineer/Professor
I designed the Dynamic and Active Orthosis concept which can be used in association with the underwater traction device "MANTARAYA", created a few years ago. This is a concept enabling both paraplegic people and sportive divers to swim underwater the same way as dolphins.
Teen and young drivers are the most likely to be involved in serious and/or fatal accidents. Their inexperience is dangerous, yet not known to surrounding motorists. In this invention, the vehicle marker lights could be designed in such a way as to respond to a "juvenile driver" key or fob, of other entry required to start a motor vehicle.
Problem Statement
We know that rapid development will cause environmental changes especially on mobility, infrastructure and the environment. Most young families decide to live in the city while middle-age families prefer to live in sub urban areas, thanks to high speed hyperloop.
In order to save more time for the victims and reduce the difficulties of the rescue, Mazu is a marine rescue drone designed for medium and small vessels.
(Emotion 1) When the vessel is turned over, "Mazu" will set up to the sky automatically and immediately throw a life buoy to victims,
Until now customers go to an airport to take an international flight by an airplane service company and when they want to be medically tested go to a medical service provider. Sometimes passengers take flights with the purpose of being treated by a medical test provider at the destination. But now this is about to change.
Design Statement and Working:
In the drawing hinged partial water filled bottle is not able to balance itself because of store and restore cycle developed by water weight wave energy or and tension spring drive force.
The Melni Connector is a revolutionary new electrical connector designed to splice secondary (600v and down) electrical wires in direct burial and submersible applications. We initially made a splash in the industry when we went on ABC’s Shark Tank to pitch our connector and get additional funding to bring our products to market. 
Several green initiatives have been attempted, to advance the cause of environmental friendliness of building constructions in contemporary urban landscapes worldwide. Here, a technology is proposed, to harness the power of air draughts (from tiny wisps to gale-force types) by deploying massive planar arrays of microscopic electric power generation turbines using micro-electro-mechanical-systems (MEMS) fabrication technology.
The Meridian® FLEX Camera Testing Platform was designed to provide automotive camera manufacturers and integrators with a powerful tool for evaluating camera performance and image quality. The Platform is flexible enough for the R&D lab and fast enough for production testing of short focal length, small aperture cameras commonly found in automobile safety systems. A high-speed,
Page 31 of 57