Electronics/​Sensors/​IoT

A smart city is a city that uses various technologies to provide services and solve problems within a city. To keep these technologies running smoothly, a continuous power supply is needed to fulfill the energy demands of the city.

This technology is a new rare earth element (REE) recovery process using a room temperature ionic liquid solution. Current technologies for producing REEs require high temperatures and produce an abundance of toxic fluoride salt waste. These limitations create a need for an environmentally friendly,

According to recent research, light pollution now affects a quarter of the planet’s land surface. The falling cost of lighting and the expansion of human infrastructure are to blame. Human illumination is rising in range and intensity by approximately 2% every year.

Right now, I'm currented working on a desktop model of my Photographic APRO ( Artificial Parallel Reality Orb).

As the name states, it is photographic in nature, but is also the low-tech counterpart to my high-tech ideas in the geometry of invisibility and holodecks,

In 2020, over 7 million public-facing touchscreens were impacted by concerns about pathogen transmission from shared surfaces. This is a small subset of the 85 million connected displays currently deployed globally with the potential for touchless interactivity.

3D Precision Irrigation™ (3PI™) is an autonomous, sensor-based, data-driven, irrigation system that automatically adjusts irrigation cycles to the changing needs of the plants and trees that it monitors.

My mission is to help farmers and other growers maximize their return on resources while conserving water, preserving soil,

Distributed Queuing (DQ) was originally invented for cable TV broadcasting. However, the first two demonstrations have been on long rang IoT radios such as LoRa and Zigbee. In both demos, packet efficiency rose from a maximum achievable 50% under Aloha, to 98% when DQ swapped with Aloha.

LED video displays are a $15B market. It is also the last passive-matrix video device in production. The existing process uses discrete LEDs on conventional PCBs. With a passive backplane, all the image artifacts,

Page 6 of 6