Congratulations to Our 2025 Grand Prize and First Place Winners!
Imersiv, a breakthrough technology that improves audio performance by 100X compared to today’s very best audio equipment for applications ranging from sound engineering to space missions to medical imaging, was named the $25,000 grand prize winner at a live finalist round held November 7 in New York. Click here for the full list of winners. Also see the Top 100 highest scoring entries. Special thanks to our esteemed panel of judges.
Help build a better tomorrow
Since Tech Briefs magazine launched the Create the Future Design contest in 2002 to recognize and reward engineering innovation, over 16,000 design ideas have been submitted by engineers, students, and entrepreneurs in more than 100 countries. Join the innovators who dared to dream big by entering your ideas in our 2026 contest opening March 1.
Read About All the 2024 Winning Inventions
Special Report spotlights the eight amazing winners in 2024 as well as honorable mentions in each category, plus the top ten most popular entries as voted by our community.
Click here to read moreA ‘Create the Future’ Winner Featured on ‘Here’s an Idea’
Spinal cord injury affects 17,000 Americans and 700,000 people worldwide each year. A research team at NeuroPair, Inc. won the Grand Prize in the 2023 Create the Future Design Contest for a revolutionary approach to spinal cord repair. In this Here’s an Idea podcast episode, Dr. Johannes Dapprich, NeuroPair’s CEO and founder, discusses their groundbreaking approach that addresses a critical need in the medical field, offering a fast and minimally invasive solution to a long-standing problem.
Listen nowThank you from our Sponsors
“At COMSOL, we are very excited to recognize innovators and their important work this year. We are grateful for the opportunity to support the Create the Future Design Contest, which is an excellent platform for designers to showcase their ideas and products in front of a worldwide audience. Best of luck to all participants!”
— Bernt Nilsson, Senior Vice President of Marketing, COMSOL, Inc.
“From our beginnings, Mouser has supported engineers, innovators and students. We are proud of our longstanding support for the Create the Future Design Contest and the many innovations it has inspired.”
— Kevin Hess, Senior Vice President of Marketing, Mouser Electronics
contest
Contest
PROBLEM
Two common problems with turbocharging systems are noise and turbo lag. Closure, or partial closure, of the engine throttle while the turbo compressor is operating at high boost condition can causes excessive back pressure on the compressor creating a condition called surge. This pressure spike is damaging to the turbo bearings and compressor wheel and creates significant noise.
The PolyHitch standardized modular components can be assembled into tools or structures using, in most cases, a "Slide & Cross Hitch Pin (S&P)" assembly process. If attached to a vehicle, via the trailer hitch, the assembly (tool or structure) will be able to use the vehicle's mass as a solid anchor and, if structured properly, could also be mobile.
The Brewtube is a container for storing, transporting and dispensing home brew beer, craft beer, wine or other liquid contents for Tap delivery. It uses a sliding disc to create a variable volume container so that the contents are never exposed to the air during consumption. beer stays fresh during the entire usage. It is fully reusable,
Usually aircraft are designed and undergo different levels of stress analysis starting from conceptual design review, preliminary deign review, detail design review, validation loads, Ground test, flight test and entering into service. All these stages required multiple analyses and reviews depending on the types of loads coming out in each phase.
Due to the “Utilization Wall,” future CMOS technology calls for a radically new microprocessor architecture with less transistor switching, to take full advantage of both density and speed.
This is important not only for big many-core processors but also very small chips that are to be made in very large quantities,
Nigi torque multiplier as the name implies is a mechanism for multiplying torque. Consider two rotors coupled together. In normal case if these two rotors are connected together and allowed to rotate, then the same torque acting on the outer rotor would also act on the inner rotor.
The design that I am going to explain about is quite simple and also easy to understand. The main purpose of this design is to bring down the overall fuel consumption of the engine and also reduce the pollutants level.
FED / Fast, - ergonomic display design technology /.
Machine operator reaction on the information signal change is a complex process. Electronics consumer while perform the operator work, require the full information on the screen, successful ergonomic time capacity to read, to react on the environment that may change the situation.
Many people dead and many more battling for life has turned the spotlight once more on the disastrous consequences of improper handling of cooking gas cylinders. Hundreds of blasts are happening every year due to leakage of LPG from cylinders.
Page 595 of 1029
