2015
Entries
This project is to fabricate a coconut husk remover with shell cutter. At
present coconut husk is being removed manually which employs more time and
more man power.
To fabricate a four wheel vehicle having steering system with four modes being operated mechanically. The four modes facilitate the following capabilities: 1) To ensure tight turns in heavy traffic and tight spaces.
The Project "Design of 4 wheel steering system" aims to reduce human effort to a greater extent which one applies while driving a car. The concept came into mind when i saw one of my friend struggling to park his car. The amount of steering effort is just tremendous.
A cooling system in automobiles is used to remove excess heat produced in the internal combustion engines. In most automobiles the cooling system consists of the following components: radiator, water pump, cooling fan, pressure cap and thermostat. Of these components,
Problem Statement:
NASA currently is working on their Highway in the Sky software to designate roads in the sky. The software appears to be missing one piece of the puzzle that is critical to it's success. The problem is that in the event of a crash scenario,
The Idea we intervened from the need of Farmers and Agricultural Growth of our country. The idea is to provide small scale farmers a modern age cost-effective, better & safer "QUAD BIKE" (Mini Tractor) which will fulfill their daily agricultural & transportation requirements.
This project is mainly focused to detect the human stress and to reduce the amount of road accidents, if a person in up normal condition. when a person get tensed or cardiac problem that person will go in up normal condition. Here,
Procyrion, Inc. of Houston, TX is developing the first catheter-deployed heart pump intended for long-term treatment of chronic heart failure. Thinner than a #2 pencil and only 6cm long, AortixTM has the potential to become a low-risk circulatory assist device for a broad range of patients.
As apart of our final year project, our team is working to set up vertical axis wind turbines(VAWT) along sides of railway tracks. We intend to utilize the gust of wind produced by trains moving by to move these vertical axis wind turbines and generate electricity.
While we drive the vehicle in hilly areas and during driving due to any reason we are forced to stop the car and then we apply the hand brakes to hold the vehicle. But the problem is that it locks the vehicle in both directions,
Page 22 of 88