2015
Entries
Proposed prototype utilizes 1. centrifugal compressors/impellers, driven by 2. high speed electric motor, or 3. steam turbine, or 4. exhaust turbine/turbo, to draw high kinetic energy gas through, 5. electrically conductive diffusers, downstream; said diffusers applied with varying potentials of positive voltage to simultaneously cause arcing between over lapping diffuser plates;
This is very simple.
An eductor is a very simple design, that in this case the "liquid impulsor" is a solution of Calcium Chloride (that is liquid at least under -50°C) to "disolve" CH4 Clathrates releasing the gas that will pump up a column of mud and gas. Gas is separated from mud. Mud is filtered,
Freedom Motors NL has designed an extremely efficient 1,2 and 3-rotor industrial multifuel rotary engine concept. Displacement is 533 cc per rotor, the working rpm range is between 3000 and 4500 rpm, dependable of type and application. The engine/rpm is electronically controlled without throttle, using a (direct) multifuel injection system.
NASA’s Langley Research Center developed a new technique that enables the preparation of metal/composite hybrid laminates, also known as fiber-metal laminates (FML), through a one-step processing method. Currently FMLs are prepared by a compression process using a press or autoclave with metallic layers sandwiched between layers of glass or graphite prepreg (preimpregnated fibers with a matrix resin).
NASA Langley has developed a novel method of depositing metal and metal oxide nanoparticles onto various substrates (see ACS Nano, 3(4), 871–884 [2009]). It is rapid, scalable, and green since it does not require reducing agents or solvents. The process involves first mixing and then heating a metal salt (usually an acetate) with the desired substrate.
Car cum aircraft cum hovercraft transportation system & Overpass transportation system, or fastest ambulance in the world.
Design Statement
Car cum Aircraft cum Skater cum Hovercraft (Vehicle drives like as a car, aircraft, skater, hovercraft).
Vehicle looks like as a car, has wings on both sides (improvements in wing technology can be done with modern techniques),
FED / Fast, - ergonomic display design technology /.
Machine operator reaction on the information signal change is a complex process. Electronics consumer while perform the operator work, require the full information on the screen, successful ergonomic time capacity to read, to react on the environment that may change the situation.
Brain hypoxia is one of the major causes of death and permanent disability in newborns, making the development of an accurate and precise fetal wellness monitoring system a top maternal-fetal health priority.
There are no commercially available monitors, other than fetal heart rate, that provide continuous information regarding fetal welfare during late-stage labor.
Fiber Optic Photovoltaic Cell of my invention, solves the problem of mismatch layers of different semiconductors, also in real terms, allows you to use part of the long-term solar spectrum. The cell is constructed from semiconductive layers of specified intervals of energy applied to a side surface side by side on the transparent / fibre / core.
The Find Me Safety® Platform is the only proven and reliable cloud/server-based communication engine that monitors active GPS tracks and delivers exception reports to designated contacts if you have not arrived at your destination as expected, or have been involved in a disaster and need assistance.
Page 30 of 88