Subways are incredibly expensive to build and take years, light trains that run at street level create congestion, making traffic worst, so how to solve the problem if public transportation? With elevated trains! However even though this cost less and are quicker to build,
Internal Combustion Engines (ICE) Vehicles Charges Electric Vehicle (EV) Batteries for Random-EXCHANGE
FIGURE 1 illustrates how co-generation is added to Internal Combustion Engines (ICE) vehicle 1 before ICE intake manifold 3 at air path co-generator 2 and exhaust port 6 at exhaust gas path co-generator 7 through ICE vehicle 1 for charging batteries (capacitors or decomposed gasses) 9
Seeing the world around you in a new way opens ups many exciting new possibilities. LIght Detection and Ranging (LIDAR) is doing just that by using lasers to measure distances very precisely. It is currently one of the key enabling factors behind the autonomous driving push.
Well-known universal machine tool uses the non-accelerating propulsion design today. Excessive energy is never added to motor. The shift gearbox only provides needed torques /speeds by using the motor shaft standard highest torque and standard- idle speed.
A wide variety of suspension techniques are used in the automobile industry. Most of them use compressive spring, hydraulics, etc. Such shock absorbers require maintenance. I am proposing a novel way of shock absorber which does not require any spring, coil, oil, hydraulics or pneumatic mechanism.
Autonomous vehicles are providing a new layer of occupant security while driving. The cornerstone of the research in autonomous vehicles relies on the effective use and interpretation of sensor data. Consequently, limitations such as weather disruptions can make sensors to be unreliable and cause severe accidents. To address this,
In internal combustion engines the cam play a very important role and also takes huge impact on itself. The failure of cam is major issue which happens due to the follower, this failure is also known as the lobe failure.
This muffler is basically a combination of absorptive and reflective type and has 3 layers.
The inner one content a converging and diverging type of venturi with holes on it and a flap (can be a rhodium/palladium) in between the C/D venturi which diverts the exhaust gases.
Page 6 of 11