2014
Entries
Brief description from Fig 1 (In attachment)
1) Aluminium fabricated frame has four adjustable catchers which are mounted on a lead screw. This lead screw is rotated with the help of 2 stepper motors +/ - X axis & +/ -Y axis , which can be powered by a Lithium battery mounted on an aluminum frame.
Space capsule surviving re-entry through the Earth's atmosphere or that of another planet and impact on the surface requires knowledge of the forces of gravity and acceleration along with test design trials. Many early spacecraft that orbited the Earth landed on land or water which is still quite a hard surface if you are traveling at high speed.
Introduction:
According to DENATRAN (National Department of Transit) in December 2013 the total Brazilian fleet was 79 million vehicles including 21 million (26.5%) motorcycles. Every year 5 million new vehicles are introduced in the fleet including 1.2 million motorcycles.
In the last 15 years,
Light Tube was developed as a possible solution to produce clean water, without algae formation after exposition under the sun. Until now, optical sterilization by UV involved the use of a tank, in which the liquid must be irradiated for a certain period. These traditional devices are energy and time expensive.
MODEL DESCRIPTION:-
Keeping in mind the worse situation of our country especially in the world where there is a shortage of power supplies, this model of lighting note books and note pads are designed. This is of a very low cost and more efficient and comes in handy for students to use for
The new flow sensor uses screen-printed thick-film thermistors and resistive heaters protected by a thin layer of Parylene-C to convert heat transfer to fluid flow velocity using King's law. The thick film substrate is connected to a small electronics board, which includes a TI MSP 430 microprocessor. The electronics manage power to the resistive heaters,
Aqua Terra Hovercraft will congruently service the needs of the transportation industry by providing commercial hovercraft of superior safety, quality, technology and operation. Our commitment is to the continual development and service of new markets worldwide while being conscious of the environments we travel. ATH
will provide the Hovercraft Vessel, Crew, Maintenance, Insurance, and anything else required for operation.
•
A LiveSync pointer is a pointer which has an extra function: the laser point appears live in a presentation casted online exactly where the presenter points in the room.
LockPuck™ is a very unique pin-code lock technology that resembles a hockey puck with push-buttons. The technology is all mechanical and can be manufactured with different mounting brackets to lock-up just about anything, just about anywhere. It is an inexpensive and reliable alternative to existing battery operated pin-code locks. Did I mention keyless?
Technology Gap:
During the last decade, the world of electronics has experienced a surge in autonomous electronic devices. One last tether has prevented consumers from completely leaping into the wireless convenience - the power cord. Wireless power transmission (WPT) will remove the need for power cords for portable electronic devices including smartphones, tablets, laptops and more.
Page 42 of 82