2015
Entries
Competition Brief:
The standard computer mouse is outdated, boring, and has very limited functionality. Most mice don't feel comfortable to hold and feel cheap as well. When a mouse has buttons - there is a limit to the speed with which you can click, based on the mechanics of the buttons themselves.
ABSTRACT:
This concept focuses on the utilization of engine waste heat energy and it is done by the ORC (Organic Rankine Cycle), which uses the refrigerant as a working fluid by replacing coolant (Ethylene Glycol) from engine jacket. The ORC generates high pressure to run the turbine of turbocharger.
OrchidEarth is the name of this speaker system
Instead of using traditional cross overs that split by frequency ie tweeter gets the top range, solid state transducer gets middle and bass driver gets lower frequencies. This design requires a digital cross over that provides each individual speaker its own analogue signal because the frequency is instead split by amplitude.
This machine picks up to 18 inches of top soil (9 feet wide) with a vibrating blade. It is fed onto a conveyor belt that feeds soil into a set of disks that breaks it up. Then it is fed into a microwave oven on a continues conveyor belt,
I am a wheelchair using paraplegic with Spina Bifida, and have worn full-length orthotic leg braces periodically over 45 years. My entry idea is the inclusion of soft fabric vibrating "massage" pads epoxied into the interior of the braces' hard plastic thigh cuffs and shin/foot splints. The pads would be placed such that the upper and lower edges,
Over-The-Air Programming (OTA) based engine management updating system along with mutual data sharing with OEM's for vital performance monitoring.
We are surrounded by technology and automobile is no exception. We have seen it evolving from a simple piece of means of transportation to a high tech state of art product.
Flexible field effect transistors (FET) reported till date contains polymers like PDMS (Poly-dimethyl siloxane) or PS (Polystyrene) as substrate or gate material. This possess serious limitations in terms of their fabrication procedure, repeatability, bio-degradability, bending and long-term aging response. In this work,
Typical small scale UAVs, despite the wealth of applications to which they are suited, are unable to perform a variety of tasks due to their limited range, endurance, and payload capacity.
Our system, the PEGASUS high endurance aerial platform, is a radical departure from current small scale drone technology.
In today’s developing world scenario power generation is one of the major factors which helps in the development of a country. There are many different ways by which power can be produced. These methods include thermal power stations, nuclear power stations etc. But these are all non-renewable sources of energy. Power can also be obtained from renewable resources.
The National Aeronautics and Space Administration (NASA) seeks partners interested in the commercial application of the Polyimide Wire Insulation Repair System technology. NASAs Kennedy Space Center is offering companies licensing for this innovative wire repair technology.
The Polyimide Wire Insulation Repair System is a kit consisting of thin film polyimide patches,
Page 55 of 88