2013
Transportation & Automotive
As we all know, fuel prices are going to increase day by day & due to which budget of everything is going to increase day by day. Due to that I got an idea of making a fuel saver kit which increase mileage of vehicles up to 50-60%, increases pick up, increases power (torque),
The main problem in the racing cars and fast moving vehicle is toppling at the time of turning. There is always a threat of toppling of a car at the time of turning a steep turns at high speed.Because of this they have to slow down at curves.
The Nortilus is a human powered underwater pleasure craft.
Suspended from floatation devices and an integral snorkel, it allows the operator an underwater experience just feet below the water surface. The pedal arrangement turns a rear mounted propeller and hand controlled levers which provide rudder movement for directional control.
Nowadays, all portions of automotive industry are being developed while the road limitations are still the obstacle of this development. GPS is an adequate product to optimize the route and reduce the journey time.
OPE & VCR
Introduction
The revival of the Opposed Piston Engine (OPE) concept, by new and established engine companies, has prompted this design submission. OPE's are well known for providing the superior power density, Brake Thermal Efficiencies (BTE) and low specific fuel consumption for two and four cycle engines.
AIRPLANES TOO HEAVY....TOO WEAK...?
WELL, HOW ABOUT A BUBBLED ALUMINUM FUSELAGE?
CAR COMPONENTS? SUSPENSION? FRAME?
BUBBLED STEEL?
AN ENTIRE ENGINE BLOCK MADE OF BUBBLED METAL!
Oz is a new mobility concept, designed to answer our new urban needs.
What are these problems?
We know that people are moving to the suburbs for comfort or costs reasons, and that the companies are also moving to outside-town areas where they can have more space, bigger structure and more relations between them.
Nowadays it is really difficult to move around big cities. Traffic jams and rush hour in public transportation make the trip from home to the job a real nightmare for lots of people.
The Personal Movility Vehicle proposes a fast, fun and efficient solution for urban transportation problems.
This is a new efficient and cost effective "positive displacement" screw-compressor for air supply to a fuel cell stack. It's driven by a 20Kw Electric D/C motor with 48Volt Power source.
On the Picture you will see the lab model.
The objective of this project is to develop a safety technology that will give a warning signal before a collision, which will alert the driver and automatically apply brakes if the driver does not apply the brakes.
• Pre-collision warning system is a technology that prevents accidents.
Page 10 of 16