Entries

Order by: [ Title ] [ Date ] [ Views ]

Our off-grid tiny home designs will be on a trailer powered by solar energy and propane. The goal is to use the latest in renewable technology to create a daily living space that is equal or better in providing comfort and the convenience of a larger home. The main difference between a Solarcycle tiny home design and other tiny homes is our focus on treating the home as a thermodynamic project involving long- term tiny home living issues such as waste management, ventilation, condensation, ergonomics, accessibility, energy efficiency, insulation, safety, and manufacturability. Right now, our prototype tiny home will include an incinerator toilet, solar power storage, propane heating and cooking, an energy recovery ventilator, LED lighting, and Aerogel insulation.

...
Overcome consumer reluctance to the adoption of self-driving car technology by anthropomorphizing a separate AI-controlled self-driving vehicle which controls the navigation and operation of a connected passenger compartment. Within certain safety parameters, the human occupants would have a residual mechanism for overriding the AI as to the speed and direction of travel.

Instead of putting consumers in the counter-intuitive position of being in the "driver's seat" of a car without the need to maintain situational awareness and control over the vehicle, we use the culturally familiar concept of the "smartest horse in the barn" to create a physical separation between the consumer/travelers and the computer-controlled vehicle that is undertaking the journey, all the while providing reassuring backup control mechanisms--that ...

Building this requires 9 machines. Put 3 of them together to work as one, repeat that 2 more times with the other 6 machines. You should have one big machine with 3 different motors.(you want it to work/spin as fast as it can).3 iron shafts with a diameter of more than 2 and half inches, with 3 claws on each shaft. each claw should be an estimated foot long totaling 9 claws altogether. bearings should be used to spin the 3 shafts simultaneous with one another. 9 pure titanium blades, size and sharpness matters for the blades. put the shafts with blades in an at least 1 inch thick iron bucket at least covering the shafts. This will shred ...

Page 2 of 2