2019
Entries

A Digital Multi-Meter (DMM) is a test tool used to measure two or more electrical values principally voltage (volts), current (amps) and resistance (ohms). It is a standard diagnostic tool for technicians in the electrical/electronic industries.

What happens when an astronaut gets sick? Current missions require that astronauts take medications with them from Earth. But many medications degrade over time, especially protein drugs, and the necessary stockpile takes up precious mass and volume on a spacecraft.

Ayurveda is life in case of biomedical. It basically deals with Vatt, Pitta, Kapha. These three together are called tridoshas. They contain lot of information. These are diagnosed through a person's wrist. In today’

There are many types of wastes in the world. The most difficult one to manage is plastic.

United Aircraft Technologies (UAT) is developing a smart aircraft Inter-Connecting Clamp (ICC) solution with an Augmented Reality Monitoring System (ARMS) for aircraft wiring that improves fuel economy (overall weight reduction of the aircraft), decreases the occurrence of Repetitive Strain Injuries among the workforce,

Ever since I saw the 'Hero' Malian migrant who saved a child from Paris balcony building, I was inspired to build a mechanism that can prevent or save peoples who fall down from a building automatically.

Automated Painting of Murals on the Exterior of Large Buildings

THE PROBLEM
a.Updating the exterior of large buildings requires labor intensive maintenance.
b.Painting extremely tall murals is dangerous and beyond the skills of many artists and painters.

One of the major problems caused by sand storms or wind is the highway problem. Roads are covered by sands on regular basis blocking traffic. The cleanup is time-consuming, require many manual works and not fast enough.

This project is about an automated sediment collection for a dam that is one of the biggest challenges of hydropower enegineering. The main problems that are shown on a dam concerning sediment are that it is very difficult to manage sediments once they are at a low level.

This is a process of identifying plastic according to their polymers using the latest and state of the art technology and sorting them out in automated manner. Perhaps this is the first of its kind.

LIBS and FTIR are laboratory tested and commercially applied.

Page 6 of 53