2017
Entries

Fresh surface water mostly is contaminated by diarrhoeal pathogens. This vast source of water can be rendered safe for ‘point of use’ drinking application using our low cost solar water Pasteurisation device, ‘LifeRoll.’ Collected rainwater can also be Pasteurised to make it safe for drinking. LifeRoll is made of polythene sheets following our innovative design. When not in use, the device can be deflated and rolled into a small package for easy storage and transportation. It can also be part of a disaster kit or can be air-dropped in disaster areas to save lives, hence the name, ‘LifeRoll’. Traditional low cost filters do not effectively remove harmful diarrhoeal pathogens. No existing device at such a low cost offer facilities ...

The current invention concerns recycling. The concept is simple. Take an item out of the garbage and turn it into something useful- something people will eat from. This is accomplished by cutting a glass bottle in two. By cutting a bottle in two you create a drinking glass (or a caddy) and a funnel. There is nothing novel about cutting a bottle in two. It is more problematic as glass is a brittle material that is difficult to work with. The material can be cut by diamond grinding, - using a form cut off wheel on a lathe ( employing the concept of diminishing progressive cutting utilized in my previous patent #5,516,242). Additionally,the glass may be faced with the ...

“Motor oil does not wear out, lose its lubricating properties or change viscosity as long as it is kept free of impurities” -The U.S. Bureau of Standards.

The Clean Engine, Inc. Oil Filtration System (OFS) is an aftermarket, heavy-duty by-pass oil filter for diesel engine lubricating oil or hydraulic oil systems. Our OFS increases fleet or individual equipment productivity and engine life-cycle for material handling, transport equipment/vehicles or trucks and any other heavy equipment. These benefits are achieved by the OFS continually providing a higher degree of cleaned oil into the engine sump, or by removing particles and moisture from hydraulic fluid systems (as verified by oil analysis), significantly extending the engine lubricating or hydraulic system oil change ...

In the last three years, at least 173 people have been killed and more than 700 wounded in 17 ramming attacks around the world (source: http://www.latimes.com/nation/la-na-tsa-truck-warning-20170505-story.html).

Apart from being a tragedy on an individual level, the attacks also affect public life. The freedom to meet is a cornerstone in a civilized society.

A lot of (often temporary) anti-ram systems and safety barrier are now being installed. Most, if not all, of these systems are aesthetically unpleasing and their sole message is that there are crazy individuals in society!

The proposed "Sit-in" system has the same primary function as the present anti-ram systems but also carries a friendly message to sit down, initiate a dialogue - and work things out!

...
This is a small, weather-proof electronic module covered by solar cells. Mounted on a surface or on a stake, it monitors the solar energy available over a long period of time to see if it’s practical to build a larger solar energy system in that location.

For some locations where solar power construction is proposed, such as open fields or unobstructed roofs in largely cloudless regions, simple analysis of sun angles through a season can give useful results for solar flux.

But there are many areas where shadowing objects and vegetation, uneven landscape, or irregular weather patterns make this more difficult, and this system is intended to fill that information gap.

The individual module is powered by a combination of its solar ...

Renewable energy challenge
(From solar thermal energy to electrical energy)

This challenge is an individual idea to use 100% sustainable energy source to provide 100 % renewable energy.

This idea is based on the use of the solar heating system consisting of thermal heat collectors of a certain area that can provide adequate thermal energy to produce a pressurized steam, that in turn will press over the water surface confined in a pressure vessel to pump it up to a higher level tank, giving the the water an increase in its potential energy, that will be restored when the water will be released downward by gravity in a form of kinetic ...

Purpose and Mission:
Design a Board and Digital Interactive Graphic Game that Not ONLY teaches the Terms and Rules of the FOOTBALL GAME, but also is Entertaining, Fun, Educational; Yet also Teaches The “©MAKE-IT, TAKE-IT” Football Game of LIFE.
By Placing The Chosen Former “Celebrity Football Player” into the Center Field Dial Spot, Game Players are able to Spin the Celebrity Player Dial to see Where it Lands or Stops. Where the Dial Stops is the Awarded Spot on the BOARD to The Game Player Participant.

Points are Awarded for The Specific Stops where the Dial stops.

The “©MAKE-IT, TAKE-IT” GRAND RULE is, that as Long as The Game Participant “Makes a Positive Point Landing, He/She “Takes-IT” to keep Spinning. BUT, ...

We bring to your attention the project 2 details. The essence of the project is the use of two parts to create different objects. Using two parts and standard fasteners, you can collect simple furniture and even erect the walls of the house.

Using standard parts in the size of 30 * 31,6 cm and 31,6 * 15 cm with a living imagination allows you to collect an unlimited number of forms. The strength of their connection with the use of screw joints allows you to create a full-fledged solid furniture or build walls and various structures.

The parts are made of sand-polymer composite with the addition of basalt fiber. The parts are very durable and ...

The idea is a multifunction Unit integrated into the antenna block of a vehicle that can solve several related issues as:
a) safety
b) passenger assistance
c) vehicle insurance in the event of accidents or theft
d) connection of the vehicle and its electronic systems to the network and its infrastructures.

The Unit comprises two portions: the first one is placed externally to the vehicle; the second one is positioned inside the vehicle. The portions include a plurality of antennas, telephones and detection modules, power modules, communication modules for communication outside and inside the vehicle. They include also cameras for a 360° internal and external vision and storage modules for recording the pictures taken by them.

The first portion ...

https://cazza.co/

Cazza is a 3D printing technology company that aims to change the world through our technology and construction services. We sell 3D printing construction technology that will make construction processes more efficient, cost effective and environmentally friendly. We also provide design, engineering and construction services to build 3D printed projects. Cazzaʼs roots began by noticing a massive gap in the efficiency of construction processes. This gap was responsible for major problems in the world today including air pollution, unsafe housing, and high living costs.

What makes our product relevant:

-This system will effectively remove the need of having personnel performing hands-on construction labor
-Full creative freedom for more intricate designs and more appealing structures
-Reduced usage and waste ...

Page 1 of 86