2019
Entries

Renewable energy solutions come with their own problems, and managing the trade-offs will determine the success of a technology. Especially, with a desire to maintain and expand our modern standards of living. The diffuse, intermittent, and unpredictable nature of wind and solar energy has led to research and development in how to store the electrical energy generated. However, a partial solution to the intermittent nature of wind and solar energy is to transition our more modern refrigeration systems back to ice boxes.

Storing electrical energy, in cars or wall batteries, could be a partial solution to the intermittent and unpredictable nature of wind and solar energy. The battery storage solution comes with its own set of problems, to include ...

This magnetic lifter drone robotic aircraft.

This Small drone aircraft is based on WW2 designs used by the German Military that were recovered during The 1947 project Operation High Jump . In that time period computer science was not available as it is today which was the Reason the German militrary had limited sucess with as it was very difficult for the pilots to manually fly these devices which were driven by a series of Gyroscopes causing Ionic lift not unlike what is currently in use by the B 2 Bomber AND OTHER INTERNATIONAL military aircraft which also use jet engines to assist in the propulsion system . A computer conrtolled Drone using this propulsion system could be used ...

This drone has 4 new parts that can increase the load capacity and maneuverability many times:
• Turbopropellers are propellers with turbo expander in the center.
• Lifting body, which increases the load capacity by about 30%
• Vertical flaps that turn the resistance of the motor holders into useful work.
• Reactive cuts on the wings, which increase the load capacity and speed.

1. As is known, 1/4 central part of the propeller located above the motor does not perform work. Turboexpander makes this part work very efficiently. They can be of two types:
The first version is intended only for small drones and it has only central blades. They push air out of the middle and create ...

An autonomous and or manually controlled mortar which is wirelessly synced/paired to a drone. The drones GPS positioning and 360 camera displays and mapping functions are used to manually and or Autonomously target/fire mortar rounds. The drones built in active GPS antenna acts as a accurate on site targeting relay fish and reciever system to directly target a enemy. The active GPS has saved topography of specifically uploaded territory/terrains. The active GPS pairs to the manual fish lense cameras 360 function which enables the user to set lock a mortar round on a target using a screen/monitor. The manual targeting system is equipped with a monitor display shot connection target analysis which is a marker "x" reticle or a ...

A DUAL FASTENER MANIPULATION DEVICE can be used to manipulate two fasteners with the same axis of rotation and to manipulate the fasteners of the same axis of rotation separated by the intermediate material, and the spacing distance can be freely adjusted according to the size of the separated object.

In order to successfully join the two fasteners together, one of the fasteners must be rotated in the first direction and the other fastener must be prevented from rotating or rotating in the second direction at the same time. Typically, the process is accomplished using two separate wrenches or other fastener engagement tools, where one or more users attempt to manipulate a single fastener engagement tool to achieve the ...

Dual-Adaptive Camouflage, or DAC

Adaptive camouflage merely to an environment's background scenery is only half of the property of true invisibility.

It require a dual-adaptive camouflage; one adaptable to the outside of the suit ( usually the case) itself, and it's background scenery taking both as one complete outside environment, and another part of it adaptable to the interior moving parts of the puppet Light-Interface of the object, or suit ( usually the case).

I say " usually the case" in this instance because it may not be a suit, but the dual-adaptive camouflage invisibility would still exist in a potential state even if it were a fixed Light-Interface System, simply owing to the concept of the Light-Interface form ...

Adaptable not only to the environment, but to itself as well.

The full diversity of my Light-Interface System concept can be demonstrated with my model of an invisible suit.

My 3-D Pixel Unit concept already exists, in part, as an angle sensitive pixel, but without the counterpart 3-D pixels and the length of connection between them.

The spherical symmetry of an angle sensitive pixel, adapted to other spherically symmetric 3-D Pixel Units across a Light-Interface System is what allows it to capture the full intersecting angles of the web-of-light thru the concentrated shape of the object in the Light-Interface.

Due to the full wrap-around symmetry of the light-web intersection, replicated in a concentration, by fully wrap-around 3-D Pixels Units on a body, the ...

A V-shaped ladder is one of the most widely used home and work tools all over the world. But this tool has its limitations like it is difficult for elderly peoples to go up and down easily. It is sort of hard for physically disabled people to go up and down carrying bulky and heavy materials for anyone and so on.

This project is about building a dual functioning v-shaped ladder that has manual stepping and automatic vertical moving mechanism for elderly persons, for disabled peoples and people who occasionally carry heavy materials at home or workplaces. As seen in the figure, the mechanism is very simple. The shape is a standard V-shaped ladder. On one side there is ...

External 3-Dimensional Holodeck Scenery

In it's simplest form, invisibility is depicted outside of the Light-Interface System, while an intersection ( holodeck) of the outside light is displayed, painted all along the interior walls in the Light-Interface, itself.

External Holodeck Scenery

The external world is transmitted thru the Light-Interface System, and part is diverted into continuing it's path thru the space that the Light-Interface System rests in, while a seperate holodeck reality can be painted all along the interior walls of the Light-Interface.

Internal Hologram Casting

If not a computer-generated internal hologram, such as a person or other furniture of the background scenery, it must first be projected from another " input receiving" Light-Interface, before it can be flipped around and transmitted back out the ...

Title: Electric Roads and Electric Charging Mobile Pods for continuous charging for EV’s

Objective: To help accelerate sustainable transportation by building an infrastructure for continuous on road charging for all EV’s.

Description:
The human crave for technological development is a never-ending process and so does the pollution. So, being an intelligent species on the planet we can at least adopt technologies which will help reduce the effect of pollution on the planet to a certain extent.

There is a tremendous amount of efforts being taken for developing Electric Vehicles. However, one of the biggest challenges is to turn people’s mind to buy EV’s, because of limited mile range (250-350) and longer charging time (50-70 min) per one full ...

Page 15 of 53